Loading Envelopes - Canon iX7000 Series On-Screen Manual

Loading Paper in the Rear Tray
Note
After loading paper
Select the type and size of the loaded paper in Media Type and Printer Paper Size (or Paper
Size) in the printer driver.
See
Printing Documents (Windows)

Loading Envelopes

You can print on European DL and US Comm. Env. #10-sized envelopes.
The address is automatically rotated and printed according to the envelope's direction by specifying
with the printer driver properly.
Important
You cannot use the following envelopes.
- Envelopes with an embossed or treated surface
- Envelopes with a double flap (or sticker flaps)
- Envelopes whose gummed flaps are already moistened and adhesive
1.
Prepare envelopes.
Press down on all four corners and edges of the envelopes to flatten them.
If the envelopes are curled, hold the opposite corners and gently twist them in the
opposite direction.
If the corner of the envelope flap is folded, flatten it.
Use a pen to press the leading edge in the inserting direction flat and sharpen the
crease.
The figures above show a side view of the leading edge of the envelope.
Important
The envelopes may jam in the printer if they are not flat or the edges are not aligned. Make
sure that no curl or puff exceeds 0.1 inches / 3 mm.
2.
Load envelopes.
Open the Paper Support.
(1)
See in Loading Photo Paper of Loading Paper in the Rear Tray.
Load paper.
Open the Front Tray gently, and pull out the Front Tray Extension.
(2)
See in Loading Photo Paper of Loading Paper in the Rear Tray.
Load paper.
Printing Documents (Macintosh)
or
.
Page 37 of 468 pages