Maintaining the Ink Quality
>
Maintenance
Advanced Guide
Maintaining the Ink Quality
This printer automatically mixes the ink at fixed intervals to keep the ink density even.
You can also disable this function by clicking the Custom Settings button on the Maintenance tab and
unchecking the Execute ink quality maintenance automatically check box. You should normally check this
check box when using the printer.
Note that the ink density may become uneven when this setting is disabled. Therefore when you disable
this setting, be sure to execute the following operation about once a week.
The procedure for executing ink quality maintenance manually is as follows:
Ink Quality Maintenance
1.
Open the
printer driver setup window
2.
Click Ink Quality Maintenance on the Maintenance tab
Click OK when a message appears.
>
Performing Maintenance from a Computer
> Maintaining the Ink Quality
Page top
Page 334 of 468 pages