Transporting The Printer - Canon iX7000 Series On-Screen Manual

Transporting the Printer

> Appendix
Advanced Guide > Transporting the Printer
Transporting the Printer
When relocating the printer, pack the printer using the original packing materials.
If you do not have the original packing materials, pack the printer carefully using protective material and
place it inside a sturdy box.
Important
Do not transport or store the printer slanted, vertically, or upside-down, as the ink may leak and
damage the printer.
When transporting the printer, we recommend that you carry it with anyone.
1.
Turn the printer off.
2.
Confirm that the Power lamp is off and unplug the printer.
Important
Do not unplug the printer while the Power lamp is lit or flashing green, as it may cause
malfunction or damage to the printer, making the printer unable to print.
3.
Retract the Paper Support, then close the Front Tray.
4.
Remove the Cassette.
Pull the Cassette with your hands until it stops, and pull it out with lifting the near side slightly.
Note
Pack the Cassette using the original packing materials.
If you do not have the original packing materials, pack the Cassette using protective material
separately from the printer.
5.
Disconnect the printer cable from the computer and from the printer, and then
disconnect the power plug from the printer.
6.
Use adhesive tape to secure all the covers on the printer to keep them from opening
during transportation. Then pack the printer in the plastic bag.
7.
Attach the protective material to the printer when packing the printer.
Important
Pack the printer with the Print Head and ink tanks left installed in the printer.
Note
Clearly label the box as "FRAGILE" or "HANDLE WITH CARE".
Page 430 of 468 pages
Page top