Canon iX7000 Series On-Screen Manual page 259

Duplex Printing
Use normal-size printing
Print without reducing the page.
Use reduced printing
Reduce the page slightly during printing.
5.
Specify the side to be stapled
The printer analyzes the Orientation and Page Layout settings, and automatically selects the best
Staple Side. When you want to change the setting, select another value from the list.
6.
Set the margin width
If necessary, click Specify Margin... and set the margin width, and then click OK.
7.
Complete the setup
Click OK on the Page Setup tab.
When you execute print, duplex printing will be started.
Important
Automatic Duplex Printing appears grayed out and is unavailable when:
A media type other than Plain Paper is selected for Media Type.
Poster is selected from the Page Layout list.
When Booklet is selected from the Page Layout list, Automatic Duplex Printing and Staple Side
appear grayed out and are unavailable.
After printing the front page, there is an ink drying wait time before starting to print the back page
(Operation stops temporarily). Do not touch the paper during the time. You can change the ink
drying wait time at Custom Settings on the Maintenance tab.
Note
When performing the automatic duplex printing, do not use any plain paper smaller than A5. Also,
do not select any type of paper other than Plain Paper at Media Type.
If the back side of the paper becomes smudged during duplex printing, perform Bottom Plate
Cleaning in the Maintenance tab.
Related Topic
Cleaning Inside the Printer
Page 259 of 468 pages
Page top