Cleaning The Transport Roller (Sheet Cleaning) - Canon iX7000 Series On-Screen Manual

Hide thumbs Also See for iX7000 Series:
Table of Contents

Advertisement

Cleaning the Transport Roller (Sheet Cleaning)

>
Routine Maintenance
Contents
Cleaning the Transport Roller (Sheet Cleaning)
When the message shown below is displayed, cleaning the Transport Roller (Sheet cleaning) should be
performed as soon as possible.
You need to prepare: a cleaning sheet (supplied with the printer)
Important
You do not need to clean the transport roller until this message is displayed.
Note
You can continue to print even after the message informing you that cleaning is necessary is
displayed. However, if the transport roller is not cleaned, printed surfaces may be smudged or print
quality reduced. We recommend that you clean the transport roller as soon as possible.
Cleaning sheets can be stored under the Cassette.
See
Storing and Taking out the Cleaning Sheets
Operations of the Sheet Cleaning
Important
Sheet cleaning requires a specified cleaning sheet fed from the Rear Tray.
Do not perform any other operation while the Sheet cleaning is being performed.
1.
Make sure that the power is turned on, and then remove any paper from the Rear
Tray.
2.
Prepare a cleaning sheet.
Take out a cleaning sheet from the Cleaning Sheet Holder. For details on taking out cleaning sheets, see
and Taking out the Cleaning Sheets
3.
Open the Front Tray gently, and then pull out the Front Tray Extension.
Note
Remove any paper in the Front Tray.
4.
Peel off the protective tape at top of cleaning sheet and load the cleaning sheet
FACING DOWNWARD WITH THE ADHESIVE AREA AT THE TOP into the Rear
Tray.
> Cleaning the Transport Roller (Sheet Cleaning)
.
.
Advanced Guide
Troubleshooting
Storing
Page 82 of 468 pages

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents