Canon iX7000 Series On-Screen Manual page 414

Before Printing on Art Paper
> Appendix
Advanced Guide > Before Printing on Art Paper
Before Printing on Art Paper
When using art paper, dust is liable to be generated. It is therefore recommended that paper dust be
removed on art paper just before printing.
You will need a soft hair brush (or similar brush used to clean office
automation equipment).
The wider the brush, the more effective it will be.
Important
Be sure not to use brushes as shown below. The printing surface may be damaged.
Paper dust removal procedure:
1.
Check that the brush is not wet and free from dust or dirt.
2.
Brush the overall printing surface carefully in one direction.
Important
Be sure to brush all the way across the paper; do not start brushing at the middle or stop
halfway.
Be careful not to touch the printing surface as much as possible.
3.
To complete the removal of paper dust, brush the paper in the other direction
from top to bottom.
Page 414 of 468 pages