LevelOne WAP-6012 User Manual page 85

Properties for the TCP/IP protocol.
Problem 2: My PC can't connect to the LAN via the Wireless Access Point.
Check the following:
Solution 2




The SSID and WEP settings on the PC match the settings on the
Wireless Access Point.
On the PC, the wireless mode is set to "Infrastructure"
If using the Access Control feature, the PC's name and address
is in the Trusted Stations list.
If using 802.1x mode, ensure the PC's 802.1x software is confi-
gured correctly. See Chapter 4 for details of setup for the
Windows XP 802.1x client. If using a different client, refer to the
vendor's documentation.
Appendix B - Troubleshooting
81