LevelOne WAP-6012 User Manual page 18

Wireless Access Point User Guide
Fixed IP Ad-
dress
DHCP Server
Wins Server
Name/IP Ad-
dress
TimeZone
TimeZone
NTP Server
Name/IP Ad-
dress
If selected, the following data must be entered.

IP Address - The IP Address of this device. Enter an unused
IP address from the address range on your LAN.

Subnet Mask - The Network Mask associated with the IP
Address above. Enter the value used by other devices on
your LAN.

Gateway - The IP Address of your Gateway or Router. Enter
the value used by other devices on your LAN.

DNS - Enter the DNS (Domain Name Server) used by PCs
on your LAN.

If Enabled, the Access Point will allocate IP Addresses to
PCs (DHCP clients) on your LAN when they start up. The de-
fault (and recommended) value is Enabled.

The Start IP Address and Finish IP Address fields set the
values used by the DHCP server when allocating IP Ad-
dresses to DHCP clients. This range also determines the
number of DHCP clients supported.
Enter the server name or IP address of the Wins Server.
Choose the Time Zone for your location from the drop-down list.
If your location is currently using Daylight Saving, enable the
Adjust for
Daylight Saving Time checkbox.
You must UNCHECK this checkbox when Daylight Saving
Time finishes.
Enter the server name or IP address of the NTP.
14