Wireless Access Point User Guide
Using WPA-PSK/WPA2-PSK
For each of the following items, each Wireless Station must have the same settings as
the Wireless Access Point.
Mode
SSID (ESSID)
Wireless
Security
On each PC, the mode must be set to Infrastructure.
This must match the value used on the Wireless Access Point.
The default value is wireless
Note! The SSID is case sensitive.
On each client, Wireless security must be set to WPA-PSK.
The Pre-shared Key entered on the Access Point must also
be entered on each Wireless client.
The Encryption method (e.g. TKIP, AES) must be set to
match the Access Point.
40