802.1X Client Setup On Windows Xp - LevelOne WAP-6012 User Manual

Wireless Access Point User Guide

802.1x Client Setup on Windows XP

Windows XP ships with a complete 802.1x client implementation. If using Windows
2000, you can install SP3 (Service Pack 3) to gain the same functionality.
If you don't have either of these systems, you must use the 802.1x client software
provided with your wireless adapter. Refer to your vendor's documentation for setup
instructions.
The following instructions assume that:

You are using Windows XP

You are connecting to a Windows 2000 server for authentication.

You already have a login (User name and password) on the Windows 2000 server.
Client Certificate Setup
1. Connect to a network which doesn't require port authentication.
2. Start your Web Browser. In the Address box, enter the IP address of the Windows
2000 Server, followed by /certsrv
e.g
http://192.168.0.2/certsrv
3. You will be prompted for a user name and password. Enter the User name and
Password assigned to you by your network administrator, and click OK.
4. On the first screen (below), select Request a certificate, click Next.
Figure 42: Connect Screen
52