Virtual Ap Settings - LevelOne WAP-6012 User Manual

Virtual AP Settings

Clicking the Virtual APs link on the Wireless menu will result in a screen like the follow-
ing.
Data - Virtual AP Settings Screen
VAPs
VAP List
Enable Button
Configure Button
Disable Button
Isolation
Isolate all Virtual APs
from each other
Figure 10: Virtual AP Settings
All available VAPs are listed. For each VAP, the following
data is displayed:

*
If displayed before the name of the VAP, this indi-
cates the VAP is currently enabled. If not
displayed, the VAP is currently disabled.

VAP Name
The current VAP name is displayed.

[SSID]
The current SSID associated with this VAP.

Security System
The current security system (e.g. WPA-PSK ) is
displayed.
Enable the selected VAP.
Change the settings for the selected VAP.
Disable the selected VAP.
If this option is enabled, wireless clients using different
VAPs (different SSIDs) are isolated from each other, so
they will NOT be able to communicate with each other.
They will still be able to communicate with other clients
using the same profile, unless the "Wireless Separation"
setting on the "Advanced" screen has been enabled.
Access Point Setup
19