Wireless Access Point User Guide
Auto Config/Update
To reach this screen, select Auto Config/Update in the Management section of the
menu.
Data - Auto Config/Auto Update Screen
Auto Config
Perform Auto Con-
figuration on this
AP
Respond to Auto-
configuration re-
quest by other AP
Provide admin login
name and pass-
word
Provide Respond to
Auto-Configuration
setting
Auto Update
Check for Firmware
Upgrade..
FTP Server address
FTP File pathname
FTP Login Name
FTP Password
Figure 58: Auto Config/Auto Update Screen
If checked, this AP will perform Auto Configuration.
If checked, this AP will respond to other AP's "Auto Configu-
ration" requests. Otherwise, "Auto Configuration" requests
from other AP will be ignored.
If enabled, the login name and password need to be pro-
vided.
If enabled, the "Respond to Auto-configuration" setting need
to be provided.
If enabled, the device will check the firmware upgrade in the
time interval. Enter the desired day value in the following
field.
Enter the address for the FTP server.
Enter the full path of the firmware in the FTP server.
Enter the login name for the FTP server.
Enter the login password for the FTP server.
68