LevelOne WAP-6012 User Manual page 71

New Password
Repeat New Password
Admin Connections
Enable Wireless Web
Access
Enable HTTP
HTTP Port Number
Enable HTTPS
HTTPS Port Number
Enable Management
via Telnet
Enter the desired login password.
Re-enter the desired login password.
Enable this to allow wireless client access the device.
Enable this to allow admin connections via HTTP. If
enabled, you must provide a port number in the field
below. Either HTTP or HTTPS must be enabled.
Enter the port number to be used for HTTP connections
to this device. The default value is 80.
Enable this to allow admin connections via HTTPS
(secure HTTP). If enabled, you must provide a port
number in the field below. Either HTTP or HTTPS must
be enabled.
Enter the port number to be used for HTTPS connec-
tions to this device. The default value is 443.
If desired, you can enable this option. If enabled, you will
able to connect to this AP using a Telnet client. You will
have to provide the same login data (user name, pass-
word) as for a HTTP (Web) connection.
Access Point Management
67