Server Setup (Windows 2000 Server) - LevelOne WAP-6012 User Manual

300mbps n_max wireless gigabit poe access point
Hide thumbs Also See for WAP-6012:
Table of Contents

Advertisement

Wireless Access Point User Guide
802.1x Server Setup (Windows 2000 Server)
This section describes using Microsoft Internet Authentication Server as the Radius
Server, since it is the most common Radius Server available that supports the EAP-
TLS authentication method.
The following services on the Windows 2000 Domain Controller (PDC) are also re-
quired:
dhcpd
dns
rras
webserver (IIS)
Radius Server (Internet Authentication Service)
Certificate Authority
Windows 2000 Domain Controller Setup
1. Run dcpromo.exe from the command prompt.
2. Follow all of the default prompts, ensure that DNS is installed and enabled during
installation.
Services Installation
1. Select the Control Panel - Add/Remove Programs.
2. Click Add/Remove Windows Components from the left side.
3. Ensure that the following components are activated (selected):
Certificate Services. After enabling this, you will see a warning that the com-
puter cannot be renamed and joined after installing certificate services. Select
Yes to select certificate services and continue
World Wide Web Server. Select World Wide Web Server on the Internet In-
formation Services (IIS) component.
From the Networking Services category, select Dynamic Host Configuration
Protocol (DHCP), and Internet Authentication Service (DNS should already be
selected and installed).
42

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents