Dmx Mode; Master/Slave Mode; Sound Active Mode; Standalone (Program) Mode - Blizzard Lighting ROCKLITE TRI LED User Manual

DMX Mode

Allows the unit to be controlled by any universal DMX controller. If you are unfamiliar with
DMX, please read the DMX Primer on page #15.
1.) The ROCKLITE TRI is capable of operating with either 3 or 7 DMX channels.
To use the fi xture in 3-channel mode, use the <MENU> button to select
on the LED Readout.
2.) To operate the fi xture in 7-channel mode, use the <MENU> button to select
A001
on the LED Readout.
Stand-Alone, Master/Slave, Sound Active Modes:
Allows a single or Master/Slaved units to run factory installed programs at user selectable
speeds.
1.) To set the fi xture in Flash/Fade mode, select
slowest to fastest) or
2.) To use the fi xture in demo mode, select
button to confi rm.
3.) Each fi xture is a master by default. To set the fi xture as a slave, use the
<MENU> button to reach
Sound Acitve Mode:
1.) To use sound active mode, select either
2.) Press the <SAVE> button to confi rm.
Manual Mode (Color Preset Mode):
Allows a single unit to display a variety of colors without a DMX controller.
1.) Reach the manual adjustment by using the <MENU> button to reach
.
Adjust each color by using the <SAVE>, <UP> and <DOWN> buttons to se-
r001-r255
lect
respectively), and adjusting between 1 (lowest) and 255 (highest) for each color.
To confi rm, press the <SAVE> button.
ROCKLITE TRI LED Manual Rev. A
CC01-CC99
To confi rm, press the <SAVE> button.
SLAv,
then press the <SAVE> button to confi rm.
g001-g255 b001-b255
, or
Page 12
FF01-FF99
(Fade Mode,
dEoo
, then press the <SAVE>
SouD
.
(Red, Green and Blue,
Copyright (c) 2011 Blizzard Lighting, LLC
d001
b001