Resets; Memory All Clear: Sp5801 - Ricoh B064 Service Manual

RESETS

5.2 RESETS

5.2.1 MEMORY ALL CLEAR: SP5801

Before shipping, the SP mode data settings are printed in an SMC Report and
attached to the exposure glass of the machine for your reference. Store this report
in a safe place (next to the toner collection bottle, for example). It is a list of all the
SP initial settings. Refer to this list if you need to initialize one or more SPs. The
initial SP settings are also written in the SP mode tables at the end of this section.
As a rule, you should always print an SMC Report before initializing or adjusting
the SP settings. The SMC Report provides a concise list of all the SP commands
and their current settings. The report can be used for reference if the service
manual is not available.
Executing Memory All Clear resets all the settings stored in the NVRAM to their
default settings except the following:
SP7003-001 (B064)
SP8381 (B140)
SP5811-001:
SP5907:
1. Execute SP5990 to print out all SMC Data Lists.
2. Open SP mode 5801.
3. Press the number for the item that you want to initialize. The number you select
determines which application is initialized. For example, press 1 if you want to
initialize all modules.
B064 Series
No. What It Initializes
1 All modules
2 Engine
3 SCS (System Control
Service)
/SRM
4 IMH
5 MCS (Memory Control
Service)
6 Copier application
7 Fax application
8 Printer application
9 Scanner application
10 Network application
11 NCS (Network Control
Service)
14 DCS
15 UCS
B064 Series/B140 Series/G126
Electrical total counter value
Machine serial number
Plug & Play Brand Name and Production Name Setting
Initializes items 2 ~ 15 below.
Initializes all registration settings for the engine and copy process
settings.
Initializes default system settings, SCS settings, operation display
coordinates, and ROM update information.
Initializes the image file system.
Initializes the automatic delete time setting for stored documents.
Initializes all copier application settings.
Not used.
Initializes the printer defaults, programs registered, the printer SP bit
switches, and the printer CSS counter.
Initializes the defaults for the scanner and all the scanner SP modes.
Deletes the Netfile (NFA) management files and thumbnails, and
initializes the Job login ID.
Netfiles: Jobs to be printed from the document server using a PC and
the DeskTopBinder software
Initializes the system defaults and interface settings (IP addresses
also), the SmartNetMonitor for Admin settings, WebStatusMonitor
settings, and the TELNET settings.
Initializes the DCS (Delivery & Receive Control Service) settings.
Initializes the UCS (User Directory Control Service) settings.
5-6
Comments
SM