Inverter Operation; Inverter Feed-In And Jogging - Ricoh B064 Service Manual

6.13.3 INVERTER OPERATION

Inverter Feed-in and Jogging

[B]
B140D9B8.WMF
Just after the main switch is turned on:
• Jogger motor [D] (a stepper motor) moves the jogger fences [C] to home
position (determined by the duplex jogger HP sensor [E]).
When the Start key is pressed:
• Motor [D] positions fences [C] 20 mm away from the selected paper size to
wait for the paper.
• Inverter entrance roller [A] feeds paper to the jogger section → The paper
pushes down the gate [B].
After the paper passes through the gate:
• Motor [D] (a stepper motor) moves the jogger fences [C] in to square the
paper. This happens every page.
• After this, the jogger fences move back to the previous position (12 mm away
from the paper)
• A spring pushes the gate back up again after the paper has gone (there is no
solenoid).
SM
[A]
6-129
DUPLEX UNIT
[C]
B140D9B9.WMF
B064 Series/B140 Series/G126
[D]
[E]