Scanner Service Table - Ricoh B064 Service Manual

SERVICE PROGRAM MODE TABLES

5.6.4 SCANNER SERVICE TABLE

SP
1001 001 Model Name
002 Scanner Firmware
Version
003 Scanner Firmware
Number
004 Detail Model Name
1002 Error Log Display
1003* FTP Port Number
1004* Compression Type
1005* Erase Margin
1006* Auto Reset Timer
1009* Remote Scan Disable
B064 Series/B140 Series/G126
Number/Name Function/[Setting]
Displays the model name.
Displays the scanner firmware version.
Displays the firmware's part number.
Displays the detail model name.
Displays the error log data.
Changes the FTP port number.
After changing this value, do the following:
1. Run the Registry Editor
2. Access
/HKEY_LOCAL_MACHINE/SOFTWARE/
Ricoh/NetworkScanner
3. Change the value of 'PortNo' to this SP
mode's value
[0~65535/1]
Selects the compression type for binary
picture processing.
[1~3/1]
1: MH
2: MR
3: MMR
Creates an erase margin for all edges of the
scanned image.
If the machine has scanned the edge of the
original, create a margin.
[0~5/1 mm]
Adjusts the auto reset timer for the scanner
function.
If this is "0", the auto reset function is
disabled.
[0,10~99/1 s]
Enables/Disables the TWAIN scanner driver.
[0~1/1]
0: Disabled
1: Enabled
(B140 only)
5-150 SM