Ricoh B064 Service Manual page 473

Ricoh mfp service manual
Hide thumbs Also See for B064:
Table of Contents

Advertisement

5169
CE Login (B140 only)
If you will change the printer bit switches, you must 'log in' to service mode with this
SP before you go into the printer SP mode.
[0~1/1]
0: Off. Printer bit switches cannot be adjusted.
1: On. Printer bit switches can be adjusted.
5212*
Page Numbering
003
Duplex Printout Left/Right Position
004
Duplex Printout High/Low Position
5302*
Set Time
Sets the time clock for the local time.
[–1440~1440/1 min.]
5307*
Summer Time
Lets you set the machine to adjust its date and time automatically with the change to
Daylight Savings time in the spring and back to normal time in the fall. This SP lets
you set these items:
- Day and time to go forward automatically in April.
- Day and time to go back automatically in October.
- Set the length of time to go forward and back automatically.
The settings for 002 and 003 are done with 8-digit numbers:
Digits
1st, 2nd
3rd
4th
5th, 6th
7th
8th
001
Setting
003
Rule Set (Start)
004
Rule Set (End)
SM
Horizontally positions the page numbers
printed on both sides during duplexing.
[–10~+10/1 mm]
0 is center, minus is left, + is right.
Vertically positions the page numbers
printed on both sides during duplexing.
[–10~+10/1 mm]
0 is center, minus is down, + is up.
Meaning
Month. 4: April, 10: October (for months 1 to 9, the first digit of 0
cannot be input, so the eight-digit setting for 002 or 003 becomes
a seven-digit setting)
Day of the week. 0: Sunday, 1: Monday
The number of the week for the day selected at the 3rd digit. If " 0"
is selected for "Sunday", for example, and the selected Sunday is
the start of the 2nd week, then input a "2" for this digit.
The time when the change occurs (24-hour as hex code).
Example: 00:00 (Midnight) = 00, 01:00 (1 a.m.) = 01, and so on.
The number of hours to change the time. 1 hour: 1
If the time change is not a whole number (1.5 hours for example),
digit 8 should be 3 (30 minutes).
Enables/disables the settings for 002 and 003.
[0~1/1]
0: Disable
1: Enable
The start of summer time.
The end of summer time.
5-71
SERVICE PROGRAM MODE TABLES
B064 Series/B140 Series/G126

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents