1. Remove the tape from the sponge [A] and
attach it to the Z-folding unit.
2. At the left bottom edge of
the Z-folding unit, remove
the bracket [B] ( x 1).
3. Push in the support [C].
4. Reattach the bracket [B] (
x 1).
5. If the cover interposer tray is
attached to the finisher, attach the
ground plate [D] to the Z-folding
unit ( x 2)
CAUTION
With the support retracted,
the Z-folding unit tips easily!
SM
[A]
[B]
[B]
[C]
[D]
1-79
B064 Series/B140 Series/G126
Z-FOLDING UNIT B660
5 mm
B660I005.WMF
B660I006.WMF
B660I102.WMF