Ricoh B064 Service Manual page 504

SERVICE PROGRAM MODE TABLES
6105* Staple Position Adjustment
Adjusts the stapling position in the main scan direction.
[–3.5~+3.5/0.5 mm]
A larger value shifts the stapling position outward.
6107* Finisher Free Run (B478/B706 only)
Selects the free run mode during testing.
001 Stapling Mode
002 All Mode
003 Packing Mode
004 Shift Mode
6113* Punch Hole Adjustment
001 2-Holes
Adjusts the punch hole position in the sub-scan direction for the punch unit with
two punch holes.
[–7.5~+7.5/0.5 mm]
A larger value shifts the punch holes towards the edge of the paper.
002 3-Holes
Adjusts the punch hole position in the sub-scan direction for the punch unit with
three punch holes.
[–7.5~+7.5/0.5 mm]
A larger value shifts the punch holes towards the edge of the paper.
6116* Staple Limit Counter for Thick Paper
Multiply the normal limit by this number to determine the staple limit number for
thick paper.
[1~3/1 sheet]
6117 Finisher Input Check
001 INPUT1
002 INPUT2
003 INPUT3
INPUT4
004
005 INPUT5
006 INPUT6
6118 Finisher Output Check
6119* Punch Function Enabled (Thick Paper)
Allows punching heavier paper, including tab sheets.
[0~1/1]
0: Punching thick paper prohibited
1: Punching thick paper allowed
B064 Series/B140 Series/G126
Stapling only
All finisher operation is tested
Before you move the finisher to a new location, do
this SP. When you switch on the machine after you
moved it, the finisher automatically goes to the
ready condition.
Tests the shift mode
Displays the signals received from sensors and switches
of the finisher. ( 5.7.5)
Turn on the electrical components of the finisher
individually for test purposes. (
5-102
5.7.6)
SM