Optional Peripheral Devices; Lct (Large Capacity Tray) B473; Cover Interposer Tray B470 - Ricoh B064 Service Manual

2.1.2 ADF
The PM interval is for the number of originals that have been fed.
Pick-up Roller
Separation Roller
Paper Feed Belt
CIS Glass
White Guide Plate
Sensors
Platen Cover Sheet
Drive Gears
Transport Rollers
Entrance Roller
White Platen Roller
Pre-Scanning Roller
Scanning Roller
Exit Roller

2.1.3 OPTIONAL PERIPHERAL DEVICES

LCT (Large Capacity Tray) B473

ROLLRES
Pick-up Roller
Feed Roller
Separation Roller
NOTE: Replace pick-up, feed and separation rollers as a set. If the copier is a
machine of the B064 Series, check the counter value for each paper tray
station with SP7204 (Copy Counter – Paper Trays). If the value has
reached 300K, replace the rollers. After replacing the rollers, reset the
counter with SP7816 (Copy Counter Reset).

Cover Interposer Tray B470

The PM interval is for the number of sheets that have been fed.
Feed Belt
Pick-up Roller
Separation Roller
Driver Rollers
Idle Rollers
Discharge Brush
Bushings
Sensors
Feed Drive Gear
SM
EM 80K 160K 240K Expected K
C R R R
C R R R
C R R R
C C C
C C C
C C C C
C C C C
L L L
C C C
C C C
C C C
C C C
C C C
C C C
EM 300K 450K 1000K
R
R
R
EM 60K 120K
R R
R R
R R
C C
C C
C C
L
C C
L
2-5
Water or alcohol, belt cleaner
to clean paper feed belt.
Replace these items together.
Dry cloth
Dry cloth
Blower brush.
Water or alcohol
Grease G501.
Water or alcohol
Expected K
See
NOTE
180K Note
R Replace as a set.
R
R
C Damp clean cloth.
C
C
Lubricate with silicone oil if noisy.
C Blower brush.
Lubricate with silicone oil if noisy.
B064 Series/B140 Series/G126
PM TABLES
Note
Note
below this table.