Panasonic PT-60LCX64-K Service Manual page 97

10. Adjust "BRIGHT R" by pressing VOLUME UP/DOWN key
on the remote so that the Black Level becomes the same
as Blanking Level.
(Before Adjustment)
Black Level
(After Adjustment)
Fig. E7-4
11. Press CH UP/DOWN key on the remote to select "LEVEL
R" in the Video ADJ menu of Factory Adjust Mode. OSD
White will appear automatically.
V I D E O
B R I G H T R
L E V E L R
B R I G H T G
L E V E L G
B R I G H T B
L E V E L B
Fig. E7-5
Blanking Level
1 / 6
4 6
6 3
OSD White
4 2
6 2
4 2
6 7
12. Adjust "LEVEL R" by pressing VOLUME UP/DOWN key on
the remote so that the White Level becomes the same as
OSD White Level.
(Before Adjustment)
White Level
(After Adjustment)
13. Connect the Oscilloscope to TP5 on the Monitor P.C.B.
14. Press CH UP/DOWN key on the remote to select "BRIGHT
B" in the Video ADJ menu of Factory Adjust Mode.
15. Adjust "BRIGHT B" by pressing VOLUME UP/DOWN key
on the remote so that the Black Level becomes the same
as Blanking Level.
(Before Adjustment)
(After Adjustment)
97
OSD White Level
Fig. E7-6
Black Level
Blanking Level
Fig. E7-7
PT-60LCX64-K