Panasonic PT-60LCX64-K Service Manual page 74

PT-60LCX64-K
REMOVAL OF THE LIGHT IN POLARIZER UNITS
1. Remove the LCD Drive C.B.A. Refer to Steps 1~7 in "REMOVAL OF THE LCD DRIVE C.B.A."
2. (PT-60LCX64)
Remove the Filter Unit by removing the 4 Screws (421).
Note: Do not touch the Air Filter.
3. (PT-60LCX64)
Remove the Top Duct 1 Unit by removing the 4 Screws (458).
4. Remove the 3 Joint Piece Units.
5. Remove the Light IN Polarizer Red, Green, Blue Unit by removing the 3 Screws (423).
Note:
1. Use extreme caution not to damage the Light IN Polarizer Units (Red, Green, Blue), when servicing.
2. Clean the Polarizer Unit if necessary. Refer to "CLEANING METHOD" in SERVICE NOTES.
Joint Piece Unit
Light IN Polarizer
Blue Unit
Reassembly Note for the Light IN Polarizer Unit (Red, Green, Blue):
1) After replacing the Light IN Polarizer Units, be sure to perform Polarizer Adjustment.
2) Make sure of the mark color to distinguish the Light IN Polarizer Units ( Polarizer ).
Light IN Polarizer Red Unit has a Plate (Polarizer).
Light IN Polarizer Green Unit has 2 Plates (Polarizer and ND Filter).
Light IN Polarizer Blue Unit has 2 Plates (Polarizer and UV Cut Filter)
458
423
Air Filter
Top Duct 1 Unit
Filter Unit
421
Air Filter
423
421
Joint
Piece
Unit
Fig. P2-1
Light IN Polarizer Units
Mark
Red Mark:
Green Mark: Light IN Polarizer Green Unit
Blue Mark:
Fig. P2-2
74
Light IN Polarizer
Red Unit
423
Light IN Polarizer
Green Unit
Light IN Polarizer Red Unit
Light IN Polarizer Blue Unit