Panasonic PT-60LCX64-K Service Manual page 77

8. (PT-43LCX64/PT-50LCX64)
Remove the LCD/Prism Unit from the Projection Lens Unit by removing the 4 Screws (423).
(PT-60LCX64)
Remove the LCD/Prism Unit from the Projection Lens Unit by removing the 3 Screws (429).
(PT-43LCX64/PT-50LCX64)
Projection Lens Unit
LCD/Prism Unit
Replacement Note for Projection Lens Unit:
When replacing the Projection Lens Unit, place the Top Duct Sponge on the Projection Lens Unit as shown.
(PT-43LCX64/PT-50LCX64)
Top Duct Sponge
Reassembly Note for LCD/Prism Unit and Projection Lens Unit:
1. Be sure to install the LCD/Prism Unit and the Projection Lens Unit before installing the Fan Case Unit. Otherwise, the Fan
Case Sponge, etc. will not fit properly with the Projection Lens Unit.
2. (PT-43LCX64/PT-50LCX64)
Be sure to install the LCD/Prism Unit and the Projection Lens to the Optical Block Unit as shown.
Optical Block Unit
423
423
Fig. P3-3
Projection Lens Unit
Fig. P3-4
hole
Projection Lens Unit
Fig. P3-5
(PT-60LCX64)
Projection Lens Unit
LCD/Prism Unit
hole
align the center
77
429
(PT-60LCX64)
Top Duct Sponge
Projection Lens Unit
PT-60LCX64-K