Panasonic PT-60LCX64-K Service Manual page 67

REMOVAL OF THE MIRROR FROM THE BACK COVER
(PT-43LCX64/PT-50LCX64)
1. Remove the Screen Unit. Refer to Steps 1~4 in "REMOVAL OF THE SCREEN UNIT AND THE SPEAKER FROM THE DISPLAY."
2. 1) Remove the 2 Mirror Holder H and the 2 Mirror Holder V Unit by removing the 12 Screws (401).
2) Remove the Mirror from the top by releasing the Back Cover slots.
Note: Be careful that the Mirror does not fall down when removing.
Mirror Holder H
401
401
Reassembly Notes for Mirror:
Install the Mirror as following procedures:
1) Place the 3 sheets on the top and bottom edges of the Mirror.
(PT-43LCX64)
Sheet
0 mm ~ 5 mm
Mirror surface
Sheet
3 mm 5 mm
<Front View>
2) Hold the sheet portions of the Mirror, and insert the Mirror from the top into the Back Cover slots carefully.
When handling the Mirror, do not touch the Mirror surface.
3) Install the 2 Mirror Holder H and the 2 Mirror Holder V on the Mirror and tighten the 12 Screws (401).
401
401
Mirror Holder
V Unit
Fig. D4-6-1
Sheet
0 mm ~ 5 mm 60 mm 10 mm
3 mm 5 mm 20 mm
Fig. D4-7-1
67
Back Cover slots
(PT-50LCX64)
Sheet Sheet
Mirror surface
Sheet
5 mm
<Front View>
PT-60LCX64-K
60 mm 10 mm
Top edge
of Mirror
Sheet
Sheet
Bottom edge
of Mirror
20 mm 5 mm