Panasonic PT-60LCX64-K Service Manual page 34

PT-60LCX64-K
LCD DRIVE C.B.A. CHECK & ADJUSTMENT
It is possible to check and adjust the LCD Drive C.B.A.
The following service tools are required:
LCD Panel Flat Extension Cable (LSUA0042) X3
Relay P.C.B. (LSEP3112A) X3
Fan1,3 Extension Cable (LSUA0039) X2
Fan2 Extension Cable (LSUA0040)
Signal Extension Cable (LSUA0037)
Power Extension Cable (LSUA0038)
Thermistor 1 Defeat Cable (LSUA0003)
Thermistor 2 Defeat Cable (LSUA0013)
Cover Switch Defeat Cable (LSUA0041)
RS232C I/F Tool (LSUA0043)
D-Sub
15 Pin
RGB Cable
Signal Extension Cable
Operation
C.B.A.
RS232C I/F Tool
D-Sub 9 Pin
Serial (RS232C)
Cable
PC (2) for Test
Pattern Signal
TV/Tuner
Unit
RGB Input
1 Terminal
Video Input 1
Terminal
Power
Extension
Cable
PC (1) for LCD Drive
C.B.A. Adjustment
The following equipment is required:
PC (1) for LCD Drive C.B.A. Adjustment
D-Sub 9 Pin Serial (RS232C) Cable (for connecting the RS232C I/F Tool)
PC (2) for Test Pattern Signal
D-Sub 15 Pin RGB Cable (for connecting the PC Input Terminal)
For more details, See Fig. S2-6.
Relay P.C.B.s
AC Cord
For more details,
See Fig. S2-7.
The following original parts are not connected:
Fig. S2-4
34
LCD Panel Flat Extension Cables
LCD Drive
C.B.A.
Thermistor 1 C.B.A.
Thermistor 2 C.B.A.
20-pin Cable
Cover Switch C.B.A.
Cabinet
Ballast C.B.A.
For more
details, See
Fig. S2-8,
S2-9, S2-10.