Panasonic PT-60LCX64-K Service Manual page 69

REMOVAL OF THE FRONT JACK C.B.A. AND THE OPERATION C.B.A. FROM THE CABINET
1. 1) Remove the Rear Cover by removing the 18 Screws or 20 Screws (PT-60LC14).
2) Disconnect Connector P6305 and release it from the clamper.
2. 1) Remove the Front Cover Unit from the 8 latches.
2) Remove the Screw (454).
3) Slide the Front Side Cover R with the Operation C.B.A. as indicated by the arrow to release the 4 slots.
4) Pull off the Operation C.B.A. from front side.
5) Remove the Operation C.B.A. and the Operation Button Unit from the Front Side Cover R by removing the 4 Screws (421).
Operation
Button Unit
Front Cover
454
Unit
3. 1) Disconnect Connectors P3502, P5501 and release them from the clampers.
2) Remove the 2 Screw (401).
3) Pull off the Front Jack C.B.A. from front side.
4) Remove the Front Jack C.B.A. from the Side Jack Holder by removing the 2 Screws (421) and releasing the 2 Locking Tabs.
Front Jack
C.B.A.
421
401
Operation
C.B.A.
421
Bosses
Front Side
Cover R
Fig. D5-1
Boss
Locking
Tabs
Side Jack
Holder
Fig. D5-2
slots
P6305
Slide
421
P5501
<Rear View>
69
Clampers
<Rear View>
P3502
Clampers
PT-60LCX64-K