SERVICE POSITION (2)
LCD DRIVE C.B.A. ADJUSTMENT
It is possible to adjust the LCD Drive C.B.A. with connecting the Signal Extension Cable, the Power Extension Cable, the RS232C
I/F Tool and the Cover Switch Defeat Cable.
The following service tools are required:
Signal Extension Cable (LSUA0037)
Power Extension Cable (LSUA0038)
RS232C I/F Tool (LSUA0043)
Cover Switch Defeat Cable (LSUA0041)
PC (2) for Test
D-Sub
Pattern Signal
15 Pin
RGB Cable
TV/Tuner Unit
Video Input 1
Terminal
Operation
C.B.A.
D-Sub 9 Pin
Serial (RS232C)
Cable
Note:
When changing the input mode, point a remote at IR receiver on the Main C.B.A.
For more details, See Fig. S2-3.
LCD Drive C.B.A.
IR Receiver on
the Main C.B.A.
P2501
RGB Input
1 Terminal
Signal
Extension
Cable
AC Cord
RS232C I/F Tool
The following equipment is required:
PC (1) for LCD Drive C.B.A. Adjustment
D-Sub 9 Pin Serial (RS232C) Cable (for connecting the RS232C I/F Tool)
PC (2) for Test Pattern Signal
D-Sub 15 Pin RGB Cable (for connecting the PC Input Terminal)
Cover Switch
Defeat Cable
P2901
P2502
P2302
For more details,
See Fig. S2-9.
Power Extension
Cable
PC (1) for LCD Drive
C.B.A. Adjustment
The following original parts are not connected:
20-pin Cable
Cover Switch C.B.A.
Cabinet
Fig. S2-1
31
Projection Unit
Ballast C.B.A.
PT-60LCX64-K