Panasonic PT-60LCX64-K Service Manual page 75

REMOVAL OF THE LCD/PRISM UNIT, PROJECTION LENS UNIT, FAN CASE UNIT (FAN 1),
FAN 2
1. Remove the LCD Drive C.B.A. Refer to Steps 1~7 in "REMOVAL OF THE LCD DRIVE C.B.A."
2. (PT-60LCX64)
Remove the Filter Unit by removing the 4 Screws (421) as shown in Fig. P2-1.
Note: Do not touch the Air Filter.
3. (PT-60LCX64)
Remove the Top Duct 1 Unit by removing the 4 Screws (458) as shown in Fig. P2-1.
4. Remove the Engine Frame by removing the 8 Screws (421).
Note: After removing the Engine Frame, the Fan 2 can be removed.
Air Flow
Name
Plate
432
Reassembly Note for Fan 2:
Install the Fan 2 with the 2 Screws (432) so that the name plate (manufactureís name etc.) face in (not visible from the outside).
421
421
Fan 2
Bosses
421
Boss
Fig. P3-1
75
421
421
421
Boss
Engine Frame
PT-60LCX64-K