Panasonic PT-60LCX64-K Service Manual page 51

6. 1) Pull off the TV/Tuner Ass'y with the Ballast C.B.A. while taking care with the cables.
2) Remove the GND Plate A from the TV/Tuner Unit by removing the Screw (452).
3) Remove the SD Door Unit from the TV/Tuner Unit by releasing the 2 Locking Tabs.
holes
SD Door Unit
Reassembly Note: When installing the SD Door Unit, install the SD Door Unit with the 2 Locking Tabs from the front of the cabinet
after installing the TV/Tuner Unit into the cabinet.
Replacement Note of TV/Tuner Unit:
These parts will be necessary when replacing the TV/Tuner Unit. Set aside, and keep and re-use.
• The GND Plate A
• The SD Door Unit
Slide
Fig. D1-7-1
Reassembly Note:
SD Door Unit
<Front View>
Fig. D1-7-2
51
Locking Tabs
TV/Tuner Unit
Locking
Tabs
PT-60LCX64-K
Ballast
C.B.A.
GND
Plate A
452