Panasonic PT-60LCX64-K Service Manual page 80

PT-60LCX64-K
Reassembly Note for PT-60LCX64 optical components:
1. Once the Optical Top Unit is removed, perform Full Mirror and Polarizer Adjustment.
2. When mounting the inside components (the Field Lens, the Relay Lens, the Condenser Lens, the Full Mirrors, the Dichroic
Mirrors, the Integrator and the P/S Converter), be sure to mount them in the correct position.
3. The P/S Converter consists of 2 layers. One has round corners and the other has sharp corners. The round corner side should
be Lamp Unit side.
4. To distinguish the Field Lens Red from the Field Lens Green, put the Field Lens on white paper (Flat Side facing down). Color
is visible when viewed from the top. The Field Lens Red looks red. The Field Lens Green looks blue.
5. The Relay Lens 1 and the Field Lens Blue looks the same color. To distinguish the Relay Lens 1 from the Field Lens Blue,
hold them up to a fluorescent light (Flat Side facing up). The Relay Lens 1 looks orange. The Field Lens Blue looks purple.
6. The Full Mirror Red and the Dichroic Mirror Green which are used in PT-60LCX64 are different from 2003 models (PT-
50LCX63/PT-60LCX63). They look the same but they are not compatible.
(PT-60LCX64)
Field Lens Blue
(See Note 5)
Full Mirror Blue
Coating
Relay
Lens 2 Side
Full Mirror Blue
Projection Lens
Color:
Purple
Field Lens
Green
(See Note 4)
Coating
Side
Color:
Orange
Relay Lens 1
Dichroic
(See Note 5) Mirror
Green
(See Note 6)
Field Lens Red
(See Note 4)
Color:
Red
Coating
Color:
Side
Blue
Mark
(upper side)
Mark
(upper side)
Dichroic
Condenser
Mirror
Lens
Red
P/S Converter
(See Note 3)
Fig. P5-4-2
80
Full Mirror Red
(See Note 6)
Protrudence
Round
(on the side)
Corner
Flat
side
Round
Protrudence
Corner
(on the bottom)
Lamp
Unit
Integrator