Sony CCD-TRV118 Service Manual page 171

Using the fader function
(1) To fade in [a]
(2) Press START/STOP. The fader indicator stops flashing.
To cancel the fader function
Before pressing START/STOP, press FADER repeatedly until the indicator disappears.
Notes
•The OVERLAP, WIPE and DOT functions do not work with tapes recorded in the
Hi8
•You cannot use the following functions while using the fader function. Also, you
cannot use the fader function while using the following functions:
– Digital effect
– Color Slow Shutter
– Super NightShot
– Tape Photo recording
– Interval recording
– Frame recording
62
In the standby mode, press FADER until the desired fader indicator flashes.
To fade out [b]
In the recording mode, press FADER until the desired fader indicator flashes.
The indicator changes as follows:
FADER t M.FADER t STRIPE t BOUNCE t MONOTONE
no indicator
The last selected fader mode is indicated first of all.
After fade in/out ends, your camcorder automatically returns to the normal
mode.
/standard 8 mm
DOT WIPE
1
system.
OVERLAP
FADER
FADER