Sony CCD-TRV118 Service Manual page 204

Dubbing a tape
A/ V OUT
S VIDEO OUT
: Signal flow
When you have finished dubbing a tape
Press x on both your camcorder and the VCR.
To prevent deterioration of pictures when dubbing
Set EDIT to ON in the menu settings before dubbing. (The default setting is OFF.)
(p. 214)
You can edit on VCRs that support the following systems:
8 mm , Hi8
Betamax , ED Betamax
If your VCR is a monaural type
Connect the yellow plug of the A/V connecting cable to the video input jack and the
white or the red plug to the audio input jack on the VCR. When the white plug is
connected, the left channel audio is output, and when the red plug is connected, the
right channel audio is output.
If your VCR is a stereo type
Connect the audio plug of the A/V connecting cable to the left (white) input jack of
your VCR.
If your VCR has an S video jack
Pictures can be reproduced more faithfully by using an S video cable (optional).
With this connection, you do not need to connect the yellow (video) plug of the A/V
connecting cable.
Connect an S video cable (optional) to the S video jacks of both your camcorder and the
VCR.
CCD-TRV418
A/V connecting cable
(supplied)
, Digital8 , VHS , S-VHS
, mini DV
Yellow
IN
S VIDEO
VIDEO
AUDIO
Black
, VHSC , S-VHSC
, DV , or MICRO MV
VCR
,
.
95