Sony CCD-TRV118 Service Manual page 30

[SERVICE POSITION TO CHECK VC-303 BOARD (SIDE B)]
Connection to Check VC-303 Board (Side B)
To check VC-303 board (side B), set the camera or VTR to the "Forced camera power ON" mode.
Operate the camera functions of the zoom and focus, the VTR section using the adjustment remote
commander (with the HOLD switch set in the OFF position).
Setting the "Forced Camera Power ON" mode
1) Select page: O, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 01 and
press the PAUSE button of the adjustment remote
commander.
Setting the "Forced VTR Power ON" mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 02 and
press the PAUSE button of the adjustment remote
commander.
Info lithium battery
(L series)
CPC jig connector
(J-6082-539-A)
Adjustment remote
commander (RM-95)
I/F unit for LANC control
(J-6082-521-A)
Cabinet (R) block assembly
CCD-TRV118/TRV218E/TRV318/TRV418/TRV418E
Exiting the "Forced Power ON" mode
1) Select page: O, address: 01, and set data: 01.
2) Select page: D, address: 10, data: 00, and press the PAUSE
button of the adjustment remote commander.
3) Select page : 0, address: 01, and set data: 00.
Contacting
surface
VC-303 board
FP-576 flexible board
2-21
Battery panel block assembly
AC power
AC IN
adaptor
Lens block assembly