Inserting A Scene - Sony CCD-TRV118 Service Manual

Inserting a scene

You can insert a scene in the middle of a recorded tape by setting the start and end
points. The previously recorded frames between these start and end points will be
erased.
Use the Remote Commander for this operation.
(1) In the standby mode, keep pressing EDITSEARCH, and release the button at
(2) Press ZERO SET MEMORY on the Remote Commander.
(3) Keep pressing the – 7 side of EDITSEARCH and release the button at the
(4) Press START/STOP to start recording.
ZERO SET
MEMORY
Notes
•The zero set memory function does not work with tapes recorded in the Hi8
standard 8 mm
•The picture and the sound may be distorted at the end of the inserted section when it
is played back.
If a tape has a blank portion between recorded portions
The zero set memory function may not work correctly.
82
[a]
the insert end point [b].
The ZERO SET MEMORY indicator flashes and the counter resets to zero.
insert start point [a].
The scene is inserted. Recording stops automatically near the counter zero
point. Your camcorder returns to the standby mode.
The zero set memory function is canceled.
system.
[b]
EDITSEARCH
/