Sony CCD-TRV118 Service Manual page 328

Changing the menu settings
Icon/item Mode
TAPE SET
REC MODE z SP
AUDIO MODE * 2) z 12BIT
ORC TO SET * 3)
ORC stands for "Optimizing the Recording Condition."
q REMAIN z AUTO
FRAME REC * 2) z OFF
2)
INT. REC *
z OFF
* 1) Modes on the POWER switch vary depending on models (p. 16).
2)
*
* 3)
4)
*
Meaning
To record in the SP (Standard Play) mode.
LP To increase the recording time to 1.5 *
times the SP mode.
To record in the 12-bit mode (two stereo
sounds).
16BIT To record in the 16-bit mode (one stereo sound
with high quality).
— To automatically adjust the recording condition
to get the best possible recording. Press START/
STOP to start adjustment. Your camcorder takes
about 10 seconds to check the tape condition
and then returns to the standby mode.
To display the remaining tape bar:
• For about eight seconds after your camcorder
is turned on and calculates the remaining
amount of tape.
• For about eight seconds after a cassette is
inserted and your camcorder calculates the
remaining amount of tape.
• For about eight seconds after N is pressed in
VCR/PLAYER mode.
• For about eight seconds after DISPLAY is
pressed to display the screen indicators.
• For the period of tape rewinding, forwarding
or picture search in VCR/PLAYER mode.
ON To always display the remaining tape bar.
To deactivate the frame recording.
ON To activate the frame recording (p. 74).
ON To activate the interval recording function
(p. 72).
To deactivate the interval recording function.
SET To set INTERVAL and REC TIME for interval
recording.
2) 3)
/2 *
(continued on the following page)
POWER
switch * 1)
VCR
CAMERA
VCR * 4)
CAMERA
CAMERA
VCR/
PLAYER
CAMERA
CAMERA
CAMERA
219