Sony CCD-TRV118 Service Manual page 338

Types of trouble and how to correct trouble
Others
Symptom
Easy Dubbing does not function.*
Digital program editing to a tape
2)
does not function.*
Digital program editing to a
"Memory Stick" does not function.*
The Remote Commander supplied
with your camcorder does not
4)
work.*
* 1)
2)
*
* 3)
4)
*
* 5)
Cause and/or Corrective Action
• Your VCR and/or video camera recorder is not set
1)
correctly.
c Make sure the input selector of the VCR is set to LINE.
Also, make sure the power switch of the video camera is
set to VTR/VCR (p. 99).
• The IR SETUP code or PAUSE MODE is not set correctly.
c Select the correct IR SETUP code and PAUSE MODE,
according to your VCR. Then confirm VCR operation
with the IR TEST function (p. 99).
• The input selector on the VCR is not set correctly.
c Check the connection and set the input selector on the
VCR again (p. 107).
• Your camcorder is connected to DV equipment of other
than Sony using the i.LINK cable.
c Set it to IR (p. 107).
• You have attempted to set a program on a blank portion of
the tape.
c Set the program again on a recorded portion (p. 115).
• Your camcorder and the VCR are not synchronized.
c Adjust the synchronization (p. 113).
• The IR SETUP code is incorrect.
c Set the correct code (p. 101).
• PB MODE is set to
c Set it to AUTO (p. 215).
• Setting program on a blank portion of the tape is
3) attempted.
c Set the program again on a recorded portion (p. 156).
• COMMANDER is set to OFF in the menu settings.
c Set it to ON (p. 222).
• Something is blocking the infrared rays.
c Remove the obstacle.
• The batteries are inserted with + and – incorrectly
matching + and – inside the battery compartment.
c Insert the batteries correctly (p. 264).
• The batteries are dead.
c Insert new ones (p. 264).
/ in the menu settings.*
(continued on the following page)
3)
229