1. Manuals
  2. Brands
  3. Sony Manuals
  4. Camcorder
  5. Handycam CCD-TR311
  6. Service manual

Sony Handycam CCD-TR311 Service Manual

Video camera recorder; video camera recorder
Hide thumbs Also See for Handycam CCD-TR311:
Table of Contents

Advertisement

Quick Links

CCD-TR311/TR311E/TR411E/TR412E/TR511E/
TR512E/TR640E/TR730E/TR840E/TR845E
SERVICE MANUAL
B MECHANISM
Video camera recorder
System
Video recording system
2 Rotary heads
Helical scanning FM system
Audio recording system
Rotary heads, FM system
Video signal
CCD-TR311 : NTSC color, EIA
standards
CCD-TR311E/TR411E/TR511E/
TR512E/TR640E/TR730E/TR840E/
TR845E : PAL color, EIA standerds
Usable cassette
8mm video format cassette
CCD-TR311/TR311E/TR411E/TR412E/
TR511E/TR512E/TR640E/TR730E :
standard 8
CCD-TR840E/TR845E :
Hi8 or standard 8
Recording / Playback time
(using 90 min. cassette)
SP mode: 1 hour and 30 minutes
LP mode: 3 hours
Fastforward/rewind time
(using 90 min. cassette)
Approx. 5 min.
Image device
CCD (Charge Coupled Device)
Viewfinder
Electronic viewfinder
CCD-TR311/TR311E/TR411E/TR412E/
TR511E/TR640E/TR840E/TR845E :
Monochrome
CCD-TR512E/TR730E :
Color 113,578 (521 x 218)
MICROFILM
Photo : CCD-TR840E
: RMT-708
SPECIFICATIONS
Lens
Combined power zoom lens
Filter diameter 1 7/16 in. (37 mm)
CCD-TR411E (AEP, UK) :
16 x (Optical), 32 x (Digital)
CCD-TR412E (AEP) :
16 x (Optical), 64 x (Digital)
CCD-TR311/TR311E :
16 x (Optical), 100 x (Digital)
CCD-TR411E (EE, NE, RU) :
16 x (Optical), 160 x (Digital)
CCD-TR412E (EE, NE, RU) :
16 x (Optical), 200 x (Digital)
CCD-TR511E (AEP, UK)/TR640E
(AEP, UK)/TR840E (AEP, UK)/
TR845E : 18 x (Optical), 72 x (Digital)
CCD-TR511E (EE, NE, RU, E, HK,
AUS, CN)/TR512E/TR640E (EE, NE,
RU)/TR730E/TR840E (EE, NE, RU,
AUS) : 18 x (Optical), 220 x (Digital)
Focal distance
CCD-TR311/TR311E/TR411E/
TR412E :
3/16 - 2 5/8 in. (4.1 - 65.6 mm)
CCD-TR511E/TR512E/TR640E/
TR730E/TR840E/TR845E :
3/16 - 8 in. (4.1 - 73.8 mm)
When converted to a 35 mm still
camera
CCD-TR311/TR311E/TR411E/
TR412E :
1 9/16 - 24 7/8 in. (39.4 - 630 mm)
CCD-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/TR640E/TR730E
CCD-TR511E/TR512E :
1 9/16 - 28 in. (39.4 - 709 mm)
CCD-TR640E/TR730E/TR840E/
TR845E :
1 7/8 - 33 1/2 in. (47.2 - 850 mm)
CCD-TR411E/TR412E/TR511E/TR640E/TR840E/
North European Model
CCD-TR411E/TR412E/TR511E/TR640E/TR840E
CCD-TR311/TR311E/TR511E/TR512E/TR730E
For MECHANISM ADJUSTMENTS, refer to
the "8mm Video MECHANICAL ADJUSTMENT
MANUAL VII" (9-973-801-11).
Color temperature
Auto
Minimum illumination*
CCD-TR311/TR311E/TR411E/TR412E :
0.4 lux at F1.4 (Visible minimum low
light 0.2 lux)
CCD-TR511E/TR512E :
0.4 lux at F 1.4
CCD-TR640E/TR730E/TR840E/
TR845E : 0.7 lux at F 1.4
CCD-TR511E/TR512E/TR640E/
TR730E/TR840E/TR845E :
0 lux (in NightShot mode)**
* Minimum illumination
expresses the light level a camcorder
requines to produce a picture. Visible
minimum low light expresses the light
level to produce a visible signal.
**Object invisible for the dark can be
shot with infrared lighting.
Illumination range
CCD-TR311/TR311E/TR411E/
TR412E/TR511E/TR512E :
0.4 lux to 100,000 lux
CCD-TR640E/TR730E/TR840E/
TR845E : 0.7 lux to 100,000 lux
Recommended illumination
More than 100 lux
hVIDEO CAMERA RECORDER
HVIDEO CAMERA RECORDER
RMT-708/717
AEP Model
TR845E
UK Model
CCD-TR411E/TR511E/TR640E/TR840E
East European Model
Russian Model
E Model
Hong Kong Model
CCD-TR311E/TR511E
Australian Model
CCD-TR311E/TR511E/TR512E/TR840E
Tourist Model
CCD-TR311/TR311E
Chinese Model
CCD-TR311E/TR511E/TR512E
Input and output connectors
S video input/output
(CCD-TR840E/TR845E only)
4-pin mini DIN
Luminance signal :
1 Vp-p, 75 ohms, unbalanced
CCD-TR311 :
Chrominance signal :
0.286 Vp-p, 75 ohms, unbalanced
CCD-TR311E/TR411E/TR412E/
TR511E/TR512E/TR640E/TR730E/
TR840E/TR845E :
Chrominance signal :
0.3 Vp-p, 75 ohms, unbalanced
Video input
(CCD-TR840E : AUS only)/output
Phono jack :
1 Vp-p, 75 ohms, unbalanced
— Continued on next page —
CCD-TR840E/TR845E

Advertisement

Table of Contents
loading

Related Manuals for Sony Handycam CCD-TR311

Summary of Contents for Sony Handycam CCD-TR311

  • Page 1 16 x (Optical), 64 x (Digital) Video signal 0.4 lux at F 1.4 Chrominance signal : CCD-TR311/TR311E : CCD-TR311 : NTSC color, EIA CCD-TR640E/TR730E/TR840E/ 0.286 Vp-p, 75 ohms, unbalanced 16 x (Optical), 100 x (Digital) standards TR845E : 0.7 lux at F 1.4...
  • Page 2 COMPONENTS IDENTIFIED BY MARK ! OR DOTTED LINE WITH MARK ! ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
  • Page 3 – 3 –...
  • Page 4 7 Shoulder strap (1) 8 21 pin adaptor (1) CCD-TR411E/TR412E/TR511E/TR640E/TR840E/TR845E 9 2 pin conversion adaptor (1) CCD-TR311/TR311E : E, HK, JE/TR511E : E, HK/TR512E : E/TR730E : E • Abbreviation HK : Hong Kong Model : Tourist Model – 4 –...

  • Page 5: Power Supply During Repairs

    SERVICE NOTE 1. POWER SUPPLY DURING REPAIRS In this unit, about 10 seconds after power is supplied (8.4V) to the battery terminal using the service power cord (J-6082-223-A), the power is shut off so that the unit cannot operate. Battery switch This following two methods are available to prevent this.

  • Page 6: Self-Diagnosis Function

    SELF-DIAGNOSIS FUNCTION 1. Self-diagnosis Function 2. Self-diagnosis display When problems occur while the unit is operating, the self-diagnosis When problems occur while the unit is operating, the counter of the function starts working, and displays on the viewfinder what to do. viewfinder shows a 4-digit display consisting of an alphabet and This function consists of two display;...

  • Page 7: Self-Diagnosis Code Table

    4. Self-diagnosis Code Table Self-diagnosis Code Symptom/State Correction Block Detailed Function Code Condensation. Remove the cassette, and insert it again after one hour. Clean with the optional cleaning cassette. Video head is dirty. Non-standard battery is used. Use the InfoLITHIUM battery. LOAD direction.

  • Page 8: Table Of Contents

    TABLE OF CONTENTS SERVICE NOTE 2. DISASSEMBLY Power Supply During Repairs ......... 5 2-1. Removal of Front Panel Block ......... 2-1 To Take out a Cassette when not Eject (Force Eject) ..5 2-2. Removal of Cabinet (R) Block ......... 2-2 2-3.
  • Page 9 1-4. Color Electronic Viewfinder System Adjustments (VC-195 board) (CCD-TR840E/TR845E) ....5-44 (CCD-TR512E/TR730E) ..........5-22 Standerd8 REC Y Current Adjustment (VC-195 board) EVF Initial Data Input ..........5-22 (CCD-TR311/TR311E/TR411E/TR412E/TR511E/ VCO Adjustment (VF-119 board) ......5-23 TR512E/TR640E/TR730E) ........5-45 Bright Adjustment (VF-119 board) ......5-23 Hi8 REC L Level Adjustment Contrast Adjustment (VF-119 board) .....5-24...
  • Page 10 6. REPAIR PARTS LIST 6-1. Exploded Views ............6-1 6-1-1. Cabinet (L) Block Assembly ........6-1 6-1-2. Front Panel Block Assembly ........6-2 6-1-3. Cabinet (R) Block Assembly ........6-3 6-1-4. EVF Block Assembly (B/W EVF) (Except CCD-TR512E/TR730E) ......6-4 6-1-5. EVF Block Assembly (Color EVF) (CCD-TR512E/TR730E) .........6-5 6-1-6.

  • Page 36: Disassembly

    CCD-TR311/TR311E/TR411E/TR412E Cabinet (N) Screw (M2x4) Front panel block Two screws (M2x4) FP-629 flexible board CN303, 20P Screw (M2x4) Front panel block Claw FP-629 flexible board Screw (M2x4) CN303, 20P Two screws (M2x4) Claw Except CCD-TR311/TR311E/TR411E/TR412E Screw (M2x4) Two screws (M2x4)

  • Page 37: Removal Of Cabinet (R) Block

    2-2. REMOVAL OF CABINET (R) BLOCK 2-3. REMOVAL OF EVF BLOCK-1 Note : Be sure to that the pin of the Lens assembly is put into the hole of the IR knob when attaching. (CCD-TR511E/TR512E/TR640E/TR730E/TR840E/TR845E) VF flexible retainer sheet Tapping screw Tapping screw VF base Three tapping...

  • Page 38: Removal Of Evf Block-2 (Lb-54, Vf-119 And Vf-120 Boards)

    2-5. REMOVAL OF EVF BLOCK-2 (LB-54, VF-119 AND VF-120 BOARDS) ilt-up the EVF block to the direction of arrow A . VF insullating sheet FP-638 flexible board CN5401,20P Remove the EVF rear cabinet assembly to the direction of arrow B . !º...

  • Page 39: Removal Of Battery Panel Block

    2-7. REMOVAL OF BATTERY PANEL BLOCK 2-8. REMOVAL OF CASSETTE LID ASSEMBLY Two screws (M2x4) Cassette lid assembly Connector CN501, 5P Battery panel block Two screws (M2x4) 2-9. REMOVAL OF CABINET (L) BLOCK 2-10. REMOVAL OF CONTROL SWITCH BLOCK (FK-8500) Cabinet (L) block Remove the Control switch block (FK-8500) in the direction of arrow...

  • Page 40: Removal Of Zoom Lens Block

    2-11. REMOVAL OF ZOOM LENS BLOCK 2-12. REMOVAL OF DD-105 AND PJ-81 BOARDS EXCEPT CCD-TR311/TR311E/ TR411E/TR412E CCD- TR730E/TR840E/ TR845E !¡ FP-620 flexible board !º Shoe assembly CN909,10P Three screws (M2x3) FP-622 flexible board CN932, 16P Two screws (M2x3) CN914, 48P...

  • Page 41: Service Position

    2-14. SERVICE POSITION Preparation : Refer to previous section “DISASSEMBLY”, and connect as shown in the figure after each parts has been removed. CPC-jig (J-6082-281-A) VC-195 board : CN910, 16P Extension cord 48P (J-6082-382-A) DD-105 board : CN914 — VC-195 board : CN931 VC-195 board Screw (M2x3) Control switch block...

  • Page 42: Circuit Boards Location

    2-15. CIRCUIT BOARDS LOCATION VF-99 VF-120 (B/W EVF) (COLOR EVF) LB-54 (BACK LIGHT) VC-195 SE-65 CAMERA, Y/C PROCESSOR, IN/OUT, (STEADY SHOT) REC/PB HEAD AMP, SERVO/SYSTEM CONTROL, SERVO, AUDIO, MODE CONTROL VF-119 (COLOR EVF) CD-181 (CCD IMAGER) CF-49 (CONTROL) MA-311 (STEREO MIC) DD-105 (POWER) PJ-81...

  • Page 43: Block Diagrams

    CCD-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ TR640E/TR730E/TR840E/TR845E SECTION 3 BLOCK DIAGRAMS 3-1. OVERALL BLOCK DIAGRAM...

  • Page 44: Camera/Video Block Diagram

    CCD-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ TR640E/TR730E/TR840E/TR845E 3-2. CAMERA/VIDEO BLOCK DIAGRAM CAMERA REC 0.3Vp-p 0.4Vp-p CAMERA REC IC001 IC001 CAMERA REC TRIG : IC001 0.4Vp-p CAMERA REC 3Vp-p CAMERA REC 0.3Vp-p IC202 1.3Vp-p CAMERA REC 0.5Vp-p IC001 IC001 1.3Vp-p IC401 IC202 IC502 CAMERA REC 3.2Vp-p CAMERA REC 0.4Vp-p...

  • Page 45: Vtr/Camera Control Block Diagram

    CCD-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ TR640E/TR730E/TR840E/TR845E 3-3. VTR/CAMERA CONTROL BLOCK DIAGRAM 1.7Vp-p 20 MHz IC402 3Vp-p 13usec IC402 3Vp-p IC402 3Vp-p IC402 3Vp-p IC402 3-11 3-10...

  • Page 46: Servo Block Diagram

    CCD-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ TR640E/TR730E/TR840E/TR845E 3-4. SERVO BLOCK DIAGRAM 3Vp-p 13usec 3Vp-p IC402 0.76Vp-p 2.8msec 506 kHz IC402 IC801 1.2Vp-p 5.6msec IC451 3Vp-p 3Vp-p 1.2msec 0.76Vp-p IC402 IC402 507 kHz IC801 3Vp-p 13usec IC402 3-12 3-13 3-14...

  • Page 47: Mode Control Block Diagram

    CCD-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ CCD-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ TR640E/TR730E/TR840E/TR845E TR640E/TR730E/TR840E/TR845E 3-5. MODE CONTROL BLOCK DIAGRAM 1.5Vp-p 20 MHz IC604 2.6Vp-p 32 kHz IC604 CAMERA REC 3Vp-p IC701 3-15 3-16 3-17 3-18...

  • Page 48: Audio Block Diagram

    CCD-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ TR640E/TR730E/TR840E/TR845E 3-6. AUDIO BLOCK DIAGRAM 0.4Vp-p IC301 CAMERA REC 0.36Vp-p IC301 CAMERA REC 0.26Vp-p 3.58 MHz IC301 CAMERA REC 2.9Vp-p IC301 3-19 3-20 3-21 3-22...

  • Page 49: Color Evf Block Diagram

    CCD-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ TR640E/TR730E/TR840E/TR845E 3-7. COLOR EVF BLOCK DIAGRAM 7.5Vp-p IC5401 7.2Vp-p IC5401 7.6Vp-p IC5401 3Vp-p IC5401 3Vp-p 12Vp-p IC5404 IC5301 3Vp-p IC5404 3.4Vp-p 1.84 MHz IC5404 23 24 3Vp-p 7.852 kHz IC5404 20 21 2.7Vp-p 3Vp-p 11.06 MHz IC5404 IC5404 2.4Vp-p...

  • Page 50: B/W Evf Block Diagram

    CCD-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ CCD-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ TR640E/TR730E/TR840E/TR845E TR640E/TR730E/TR840E/TR845E 3-8. B/W EVF BLOCK DIAGRAM 2.2Vp-p IC901 1Vp-p IC901 3-26 3-27 3-28...

  • Page 51: Power Block Diagram

    CCD-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ TR640E/TR730E/TR840E/TR845E 3-9. POWER BLOCK DIAGRAM 3-29 3-30 3-31 3-32 E...

  • Page 52: Frame Schematic Diagram

    CCD-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ SECTION 4 TR640E/TR730E/TR840E/TR845E PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS 4-1. FRAME SCHEMATIC DIAGRAM FRAME...
  • Page 53 CCD-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ CCD-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ TR640E/TR730E/TR840E/TR845E TR640E/TR730E/TR840E/TR845E 4-2. PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS CD-181 (CCD IMAGER) PRINTED WIRING BOARD – Ref No. CD-181 BOARD: 3,000 series – THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS. (In addition to this, the necessary note is printed in each block.)
  • Page 54 CCD-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ TR640E/TR730E/TR840E/TR845E SE-65 (STEADY SHOT) PRINTED WIRING BOARD – Ref No. SE-65 BOARD: 3,000 series – SE-65 BOARD (SIDE B) SE-65 BOARD (SIDE A) SE-65 BOARD C451 C452 C453 C454 C455 C456 C457 C458 C459 C460 C461 C462 C463 C464...

  • Page 55: Camera, Y/C Processor, In/Out, Rec/Pb Head Amp, Servo/System Control, Servo, Audio, Mode Control) Board

    CCD-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ CCD-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ TR640E/TR730E/TR840E/TR845E TR640E/TR730E/TR840E/TR845E VC-195 (CAMERA, Y/C PROCESSOR, IN/OUT, REC/PB HEAD AMP, SERVO/SYSTEM CONTROL, SERVO, AUDIO, MODE CONTROL) PRINTED WIRING BOARD VC-195 BOARD – Ref No. VC-195 BOARD: 1,000 series – (SIDE B) C002 C213 C481 C774 L156 Q454 R112...
  • Page 56 CCD-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ CCD-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ TR640E/TR730E/TR840E/TR845E TR640E/TR730E/TR840E/TR845E VC-195 BOARD (SIDE A) VC-195 BOARD (SIDE A) C001 A-13 C328 C-11 CN908 A-17 R074 C-12 R527 B-17 C004 A-14 C330 C-11 CN909 G-11 R075 C-13 R529 E-12 C004 B-13 C331 C-11 CN911 D-17 R081 D-13...
  • Page 57 CCD-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ CCD-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ TR640E/TR730E/TR840E/TR845E TR640E/TR730E/TR840E/TR845E • For schematic diagrams. • Refer to page 4–13 for Printed Wiring Board. VC-195 BOARD (1/9) CAMERA REC 2.3Vp-p NTSC : 28.636 MHz : 28.375 MHz IC501 CAMERA REC 2.3Vp-p NTSC : 14.32 MHz : 14.18 MHz...
  • Page 58 CCD-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ CCD-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ TR640E/TR730E/TR840E/TR845E TR640E/TR730E/TR840E/TR845E • For schematic diagrams. • Refer to page 4–13 for Printed Wiring Board. 4-21 4-22 4-23 4-24 CAMERA (2) VC-195 (2/9)
  • Page 59 CCD-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ TR640E/TR730E/TR840E/TR845E • For schematic diagrams. • Refer to page 4–13 for Printed Wiring Board. VC-195 BOARD (3/9) CAMERA REC CAMERA REC 3.1Vp-p 0.34Vp-p NTSC:3.58 MHz PAL:4.43 MHz IC202 IC202 CAMERA REC CAMERA REC 0.84Vp-p 3Vp-p IC202 IC202 CAMERA REC CAMERA REC 0.5Vp-p...
  • Page 60 CCD-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ CCD-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ TR640E/TR730E/TR840E/TR845E TR640E/TR730E/TR840E/TR845E • For schematic diagrams. • Refer to page 4–13 for Printed Wiring Board. VC-195 BOARD (4/9) CAMERA REC 0.46Vp-p IC151 0.32Vp-p IC151 1.4Vp-p IC151 17 64 1.8Vp-p IC151 25 60 IC151 (2.1Vp-p) IC151 (1.6Vp-p) 4-31 4-32...
  • Page 61 CCD-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ TR640E/TR730E/TR840E/TR845E • For schematic diagrams. • Refer to page 4–13 for Printed Wiring Board. VC-195 BOARD (5/9) CAMERA REC CAMERA REC 0.3Vp-p 7Vp-p 4.12 MHz IC001 Q001 CAMERA REC 0.3Vp-p IC001 TRIG : IC001 0.4Vp-p IC001 0.4Vp-p IC001 0.4Vp-p...
  • Page 62 CCD-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ TR640E/TR730E/TR840E/TR845E • For schematic diagrams. VC-195 BOARD (6/9) • Refer to page 4–13 for Printed Wiring Board. CAMERA REC 1.7Vp-p 20 MHz IC402 3Vp-p IC402 3Vp-p IC402 3Vp-p IC402 3Vp-p 13usec IC402 3Vp-p 13usec IC402 3Vp-p 13usec IC402 3Vp-p 1.2msec...
  • Page 63 CCD-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ TR640E/TR730E/TR840E/TR845E • For schematic diagrams. • Refer to page 4–13 for Printed Wiring Board. 4-40 4-41 4-42 SERVO VC-195 (7/9)
  • Page 64 CCD-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ TR640E/TR730E/TR840E/TR845E • For schematic diagrams. VC-195 BOARD (7/9) • Refer to page 4–13 for Printed Wiring Board. CAMERA REC VC-195 BOARD (8/9) CAMERA REC 1.2Vp-p 2.9Vp-p 5.6msec IC451 IC301 3Vp-p 0.4Vp-p IC451 IC301 CAMERA REC 3Vp-p 0.36Vp-p 2.8msec IC451...
  • Page 65 CCD-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ CCD-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ TR640E/TR730E/TR840E/TR845E TR640E/TR730E/TR840E/TR845E • For schematic diagrams. • Refer to page 4–13 for Printed Wiring Board. VC-195 BOARD (9/9) 1.5Vp-p 20 MHz IC604 2.6Vp-p 32 kHz IC604 4-47 4-48 4-49 4-50 MODE CONTROL VC-195 (9/9)
  • Page 66 CCD-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ TR640E/TR730E/TR840E/TR845E PJ-81 (AV IN/OUT) PRINTED WIRING BOARD – Ref No. PJ-81 BOARD: 3,000 series – PJ-81 BOARD (SIDE B) PJ-81 BOARD C101 C102 C103 C104 C105 C106 C107 C108 C109 C110 C111 CN101 D101 D102 D103 D105 D106 D107...

  • Page 67: Control Switch Block (Fk-8500/Ss-8500)

    CCD-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ TR640E/TR730E/TR840E/TR845E MA-311 (STEREO MIC) PRINTED WIRING BOARDS – Ref No. MA-311 BOARD: 3,000 series – MA-311 BOARD (SIDE B) MA-311 BOARD (SIDE A) 1-668-934- 12 22 MA-311 BOARD C344 C373 Q301 R327 R356 C301 • For Printed Wiring Boards.
  • Page 68 CCD-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ TR640E/TR730E/TR840E/TR845E 4-59 4-58 STEREO MIC 4-57 MA-311...
  • Page 69 CCD-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ TR640E/TR730E/TR840E/TR845E CF-49 BOARD CAMERA REC 2.9Vp-p 24.48 kHz IC001 4-60 4-61 4-62 CONTROL CF-49...
  • Page 70 CCD-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ TR640E/TR730E/TR840E/TR845E CF-49 (CONTROL) PRINTED WIRING BOARD – Ref No. CF-49 BOARD: 3,000 series – CF-49 BOARD (SIDE A) CF-49 BOARD (SIDE B) CF-49 BOARD BH001 B-18 R016 R019 B-11 BZ001 B-15 R020 BZ002 B-15 R022 R023 C001 R025 C002...
  • Page 71 CCD-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ CCD-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ TR640E/TR730E/TR840E/TR845E TR640E/TR730E/TR840E/TR845E VF-99 (B/W EVF (B/W EVF MODEL)) PRINTED WIRING BOARD – Ref No. VF-99 BOARD: 10,000 series – VF-99 BOARD VF-99 BOARD (SIDE A) VF-99 BOARD (SIDE B) C901 R919 C902 R920 C903 R921 C904 R922 C905...
  • Page 72 CCD-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ TR640E/TR730E/TR840E/TR845E VF-119 (COLOR EVF (COLOR EVF MODEL)) VF-119 BOARD PRINTED WIRING BOARD – Ref No. VF-119 BOARD: 10,000 series – CAMERA REC VF-119 BOARD (SIDE B) VF-119 BOARD (SIDE A) 3Vp-p IC5401 7.2Vp-p IC5401 7.5Vp-p IC5401 7.6Vp-p IC5401 3Vp-p...
  • Page 73 CCD-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ CCD-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ TR640E/TR730E/TR840E/TR845E TR640E/TR730E/TR840E/TR845E VF-120 BOARD CAMERA REC 2.4Vp-p IC5301 12Vp-p IC5301 4-75 4-76 4-77 4-78 COLOR EVF, BACK LIGHT VF-120, LB-54 (COLOR EVF MODEL)
  • Page 74 CCD-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ CCD-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ TR640E/TR730E/TR840E/TR845E TR640E/TR730E/TR840E/TR845E VF-120 (COLOR EVF), LB-54 (BACK LIGHT) (COLOR EVF MODEL) PRINTED WIRING BOARDS – Ref No. VF-120 BOARD: 10,000 series, LB-54 BOARD: 10,000 series – VF-120 BOARD (SIDE B) VF-120 BOARD (SIDE A) VF-120 BOARD C5301 R5304...
  • Page 75 CCD-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ CCD-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ TR640E/TR730E/TR840E/TR845E TR640E/TR730E/TR840E/TR845E DD-105 (POWER) PRINTED WIRING BOARD – Ref No. DD-105 BOARD: 2,000 series – DD-105 BOARD (SIDE B) DD-105 BOARD (SIDE A) DD-105 BOARD C801 L801 R823 C802 L802 R824 C803 L803 R825 C804 L804 R826 C805...
  • Page 76 CCD-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ TR640E/TR730E/TR840E/TR845E DD-105 BOARD CAMERA REC 0.76Vp-p 507 kHz IC801 0.76Vp-p 506 kHz IC801 4-85 4-86 4-87 4-88E POWER DD-105...

  • Page 77: Adjustments

    CCD-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ TR640E/TR730E/TR840E/TR845E SECTION 5 ADJUSTMENTS Refer to page 3 as Table for distinction functions of models and classification 5-1. CAMERA SECTION ADJUSTMENTS 1-1. PREPARATIONS BEFORE ADJUSTMENT (CAMERA SECTION) 1-1-1. List of Service Tools • Oscilloscope • Color monitor • Vectorscope •...

  • Page 78: Preparations

    1-1-2. Preparations Note 1: For details of how remove the cabinet and boards, refer to “2. DISASSEMBLY”. Note 2: When performing only the adjustments, the lens block and boards need not be disassembled. 1) Connect the equipment for adjustments according to Fig. 5-1-3, 2) By setting the “Forced Camera Power ON mode”, the camera power can be turned ON even if the front panel block (MA-311 Pattern box...
  • Page 79 Color monitor Vector scope Terminated at 75 Ω Lens block CD-181 board Regulaterd power supply CN401 (8.4 ± 0.1 Vdc) Battery terminal (Note 1) Extension cable(16P) (J-6082-357-A) Adjusting Need not connected remote VIDEO terminal commander Battery switch LANC CN935 CN909 terminal CN551 CN912...

  • Page 80: Setting The Switch

    1-1-3.Precaution 1. Setting the Switch Unless otherwise specified, set the switches as follows and perform adjustments without loading cassette. 1. POWER switch (MA-311 board) ......CAMERA 6. FOCUS switch (MF-8500) ........MANUAL 2. NIGHT SHOT switch (Lens Block) ........ OFF (Manual Focus model) (Night shot model) 7.

  • Page 81: Adjusting Remote Commander

    1-1-4. Adjusting Remote Commander • Changing the address The adjusting remote commander is used for changing the The address increases when the FF ()) button is pressed, calculation coefficient in signal processing, EVR data, etc. The and decreases when the REW (0) button is pressed. There adjusting remote commander performs bi-directional are altogether 256 addresses, from 00 to FF.

  • Page 82: Data Processing

    1-1-5. Data Processing The calculation of the DDS display and the adjusting remote calculate and convert the result to hexadecimal notation, and use it commander display data (hexadecimal notation) are required for as the adjustment data. Table 5-1-2. indicates the hexadecimal obtaining the adjustment data of some adjustment items.

  • Page 83: Initialization Of D, E, F

    When changing the data, copy the performed again. data built in the same model. Note 3: < > : NTSC model (CCD-TR311) Note : If copy the data built in the different model, the camcorder [ ] : PAL model (CCD-TR311E/TR411E/TR412E/ may not operate.
  • Page 84 3. D Page Table Note1 : Fixed data-1 : Initialized data. (Refer to “1. Initializing the D,E,F Page Data”.) Fixed data-2 : Modified data. (Refer to “2. Modification of D, E, F Page Data”). Address Initial Value Remark Address Initial Value Remark NTSC PAL NTSC PAL 00 to 0F...
  • Page 85 Note 2: There are three models classified by CCD imager types as Flange back adj. shown below, and the initial value of adjustment is different according to the model. NTSC 510H model : CCD-TR311 PAL 510H model : CCD-TR311E/TR411E/TR412E/TR511E/ TR512E Angular velocity sensor PAL 760H model : CCD-TR640E/TR730E/TR840E/TR845E sensitivity adj.
  • Page 86 Address Initial Value Remark Address Initial Value Remark NTSC PAL NTSC PAL Fixed data-2 Switching position adj. Fixed data-1 Fixed data-1 Fixed data-2 Fixed data-1 Fixed data-2 Fixed data-1 Fixed data-2 Fixed data-1 Fixed data-2 Fixed data-2 Fixed data-1 Fixed data-1 Fixed data-2 Fixed data-1 Fixed data-2...
  • Page 87 5. E Page Table Address Initial Value Remark Note 1: NTSC PAL Fixed data-1 : Initialized data. Fixed data-2 ( Refer to “1. Initializing the D,E,F Page Data”.) Fixed data-2 : Modified data. (Refer to “2. Modification of D, E, F Page Data”). Fixed data-1 Address Initial Value Remark...
  • Page 88 Address Initial Value Remark Address Initial Value Remark NTSC PAL NTSC PAL Fixed data-1 Fixed data-2 Fixed data-1 Fixed data-2 Fixed data-1 Fixed data-2 Fixed data-1 Fixed data-2 Fixed data-1 Fixed data-2 Fixed data-1 Fixed data-2 Fixed data-1 Fixed data-2 FC to FF Fixed data-1 VCO adj.

  • Page 89: Camera System Adjustments

    1 : XX : XX n S2 n S1 Note 2. [ ] : CCD-TR311/TR640E/TR730E/TR840E/TR845E < > : CCD-TR311E/TR411E/TR412E/TR511E/TR512E Adjusting method: 1) Select page: 0, address: 01, and set data: 01. 2) Select page: 0, address: 03, and set data: 16.

  • Page 90: Hall Adjustment

    2. HALL Adjustment For detecting the position of the lens iris, adjust the hall AMP gain and offset. Subject Not required Measurement Point DDS display data of EVF or TV monitor (Note 3) Measuring Instrument Adjustment Page Adjustment Address 2F, 30 Specified Value 90 to 94 during IRIS OPEN (Note 1) 19 to 1D during IRIS CLOSE (Note 2)

  • Page 91: Flange Back Adjustment

    3. Flange Back Adjustment 3-2. Flange Back Adjustment (2) The inner focus lens flange back adjustment is carried out Perform this adjustment after performing “Flange Back Adjustment automatically. In whichever case, the focus will be deviated during (1)”. auto focusing/manual focusing. Subject Subject more than 500m away 3-1.

  • Page 92: Flange Back Check

    4. Flange Back Check 5. Picture Frame Setting Subject Siemens star Subject Color bar chart standard picture frame (2.0 m from the front of the lens) (1.5m from the front of the lens) (Luminance: approx. 200 lux) Measurement Point Video output terminal Measurement Point Check operation on TV monitor Measuring Instrument...

  • Page 93: Color Reproduction Adjustment

    Adjustment Page Adjustment Address 34, 36, F5, F6 Specified Value All color luminance points should settle within each color reproduction frame. Note1: NTSC 510H model (CCD-TR311) PAL 510H model (CCD-TR311E/TR411E/TR412E/ TR511E/TR512E) PAL 760H model (CCD-TR640E/TR730E/TR840E/ TR845E) Burst position Switch setting: 1) NIGHT SHOT switch ............

  • Page 94: Iris In/Out Adjustment

    EVF and TV monitor is the LIGHT LEVEL data. 00 00 XX 00 XX XX n Object data n Lower two digits Note 2: NTSC 510H model (CCD-TR311) n Upper two digits PAL 510H model (CCD-TR311E/TR411E/TR412E/ Switch setting: TR511E/TR512E) 1) STEADY SHOT (Menu display) ........

  • Page 95: Auto White Balance Standard Data Input

    9. Auto White Balance Standard Data Input 10. Auto White Balance Adjustment Adjust to the proper auto white balance output data. Subject Clear chart If it is not correct, auto white balance and color reproducibility will (Color bar standard picture frame) be poor.

  • Page 96: White Balance Check

    11. White Balance Check Subject Clear chart (Color bar standard picture frame) Filter Filter C14 for color temperature correction ND filter 1.0 and 0.3 2 mm Measurement Point video output terminal Measuring Instrument Vectorscope Specified Value Fig. 5-1-10. A to C Switch setting: 1) NIGHT SHOT switch ............

  • Page 97: Angular Velocity Sensor Sensitivity Adjustment

    12. Angular Velocity Sensor Sensitivity Adjustment (CCD-TR640E/TR730E/TR840E/TR845E) • This adjustment is performed only when replacing the angular velocity sensor. Although this adjustment need not be performed when the circuit is damaged, etc., check the operations. • Note down the sensitivity displayed on the angular velocity sensor of the repair parts.

  • Page 98: Color Electronic Viewfinder System Adjustments

    1-4. COLOR ELECTRONIC VIEWFINDER SYSTEM 1. EVF Initial Data Input ADJUSTMENT Mode VTR stop (CCD-TR512E/TR730E) Signal No signal Note 1: The back light (fluorescent tube) is driven by a high voltage Adjustment Page AC power supply. Therefore, do not touch the back light Adjusting Address C2 to CD holder to avoid electrical shock.

  • Page 99: Vco Adjustment (Vf-119 Board)

    2. VCO Adjustment (VF-119 board) 3. Bright Adjustment (VF-119 board) Set the VCO free-run frequency. If deviated, the EVF screen will be Set the level of the VIDEO signal for driving the LCD to the specified blurred. value. If deviated, the screen image will be blackish or saturated (whitish).

  • Page 100: Contrast Adjustment (Vf-119 Board)

    4. Contrast Adjustment (VF-119 board) 5. Backlight Consumption Current Adjustment (VF-120 board) Set the level of the VIDEO signal for driving the LCD to the specified value. If deviated, the screen image will be blackish or saturated Set the backlight luminance and color temperature. (whitish).

  • Page 101: Monochrome Electronic Viewfinder System Adjustments (Ccd-Tr311/Tr311E/Tr411E/Tr412E/Tr511E/Tr640E/ Tr840E/Tr845E)

    1-5. MONOCHROME ELECTRONIC VIEWFINDER SYSTEM ADJUSTMENTS (CCD-TR311/TR311E/TR411E/TR412E/TR511E/ TR640E/TR840E/TR845E) Note: NTSC model: CCD-TR311 PAL model : CCD-TR311E/TR411E/TR412E/TR511E/ TR640E/TR840E/TR845E 1-5-1. Horizontal Slant Check 1-5-2. Centering Adjustment Mode Playback Mode Playback Signal Alighment tape : Signal Alighment tape : For checking operations For checking operations...

  • Page 102: Aberration Adjustment

    1-5-4. Aberration Adjustment 1-5-5. Horizontal Amplitude Adjustment (VF-99 board) Mode VTR stop Signal Dot pattern Mode Playback Specified Value b1 2 • a1 Signal Alighment tape : b2 0.8 • a2 For checking operations (WR5-5NSP (NTSC)) Adjusting method: (WR5-5CSP (PAL)) 1) Adjust the aberration adjustment ring so that the tracing of the Monoscope section dot satisfies the specified value.

  • Page 103: Vertical Amplitude Adjustment (Vf-99 Board)

    1-5-6. Vertical Amplitude Adjustment (VF-99 board) 1-5-7. Brightness Adjustments (VF-99 board) Mode Playback Mode Playback Signal Alighment tape : Signal Alighment tape : For checking operations For checking operations (WR5-5NSP (NTSC)) (WR5-5NSP (NTSC)) (WR5-5CSP (PAL)) (WR5-5CSP (PAL)) Monoscope section Monoscope section Adjusting Element RV903 Specified Value...

  • Page 104: Mechanical Section Adjustment

    (J-6082-382-A). 7) Playback the alignment tape for tracking. and replacements of mechanism parts, refer to the separate volume- “8 mm Video Mechanism Adjustment Manual VII B Mechanism ”. WR5-1NP: For NTSC model: CCD-TR311 WR5-1CP: For PAL model: CCD-TR311E/TR411E/ TR412E/TR511E/TR512E/ 2-1.

  • Page 105: Video Section Adjustments

    5-3. VIDEO SECTION ADJUSTMENTS When performing adjustments, refer to the layout diagrams for adjustment related parts beginning from page 5-54. 3-1. PREPARATIONS BEFORE ADJUSTMENT The following adjusting instruments are used for adjusting the video section. 3-1-1. Equipments to be Used 1) TV monitor [For PAL model] 2) Oscilloscope: 2 phenomena, band 30 MHz or wider, with delay...

  • Page 106: Precautions In Adjusting

    3-1-2. Precautions on Adjusting 3-1-3. Adjusting Connectors 1) The adjustments of this unit are performed in the VTR mode or Some of the adjusting points of the video section are concentrated camera mode. at VC-195 board CN910. Connect the measuring instruments via To set to the VTR mode, set the power switch to “VTR”...

  • Page 107: Connecting The Equipments

    3-1-4. Connecting the Equipments Connect the measuring instruments as shown in Fig. 5-3-2 and perform the adjustments. Connecting the TV Monitor and Regulated Power Supply Battery terminal Main Unit TV monitor Regulated power supply 8.4 ± 0.1Vdc VIDEO Connect when using the camera mode or playing back.
  • Page 108 Note: Measure using the VIDEO terminal (Terminated at 75 Ω). Fig. 5-3-3. shows the 75% color bar signals recorded on the alignment tape. Fig. 5-3-3. Color Bar Signals of the Alignment Tape 5-32...

  • Page 109: Input/Output Level And Impedance

    3-1-6. Input/Output Level and Impedance 3-1-8. Service Mode Video input/output Additional note on adjustment Phono jack, 1 Vp-p, 75Ω, Note: After the completion of the all adjustments, cancell the unbalanced, sync negative service mode by either of the following ways. S video input/output (Hi8 model) 4-pin mini DIN 1) Unplug the main power supply and remove the lithium battery.

  • Page 110: Emergency Memory Address

    2. Emergency Memory Address 2-1. EMG CODE (Emergency Code) The codes shown in the following table which correspond to errors Page F Address 10 to 1B that occur are recorded in addresses 10, 14, and 18. Address Contents Code Type of Emergency 1st EMG code No error Upper: MSW code when the mechanism starts shifting...

  • Page 111: Msw Codes

    2-2. MSW Codes • The lower parts of the data of addresses 12, 16 and 1A represent the MSW codes (mode switch, mechanism position) when errors occurs. • The upper parts of the data of addresses 12, 16 and 1A represent, when the mechanism position is to be moved, the MSW codes at the start of movement (when moving the loading motor).

  • Page 112: Bit Value Discrimination

    3. Bit value discrimination 4. Switch check (1) Bit values must be discriminated using the display data of the Page 3 Address 43 adjusting remote commander for the following items. Use the table below to discriminate if the bit value is “1” or “0”. Function When bit value=1 When bit value=0 0 VTR MODE SW...

  • Page 113: Switch Check (2)

    5. Switch check (2) Page 3 Address 60 to 65 Using method: 1) Select page: 3, address: 60 to 65. 2) By discriminating the display data, the pressed key can be discriminated. Data Address 00 to 0D 0E to 29 2A to 46 47 to 68 69 to 90...

  • Page 114: Led, Lcd (Display Window) Check

    8. LED, LCD (display window) check 9. Record of Use Check Page 3 Address 05 Bit5 Page 3 Address A2 to AA Address Using method: Function Remarks 1) Select page: 3, address: 05, and set the bit value of Bit5 to “1”. 1000th place digit and 2) Check that all LED are lit and all segments of LCD (display 100th place digit of...

  • Page 115: System Control System Adjustment

    3-2. SYSTEM CONTROL SYSTEM ADJUSTMENT 1. Initialization of D, E, F Page Data If the D, E, F page data is erased due to some reason, perform “1-2. INITIALIZATION OF D, E, F PAGE DATA”, of “5-1. CAMERA SECTION ADJUSTMENT”. 2.

  • Page 116: Servo System Adjustments

    Specified Value t1 = 0±10µsec Adjusting method: 1) Select page: 0, address: 01, and set data: 01. Note 1: NTSC MODEL: CCD-TR311 2) Select page: 2, address: 01, and set data: 81, and press the PAUSE PAL MODEL: CCD-TR311E/TR411E/TR412E/ button of the adjustment remote commander. (to start up automatic CAP FG offset adjustment.)

  • Page 117: Video System Adjustments

    Pin ^§ of IC202 : Specified Value f=3579545±17Hz (NTSC) f=4433618.75±17Hz (PAL) Pin !™ of IC501 : f=14318181±68Hz (NTSC) f=14187500±55Hz (PAL) Note 1: NTSC MODEL: CCD-TR311 PAL MODEL: CCD-TR311E/TR411E/TR412E/ TR511E/TR512E/TR640E/TR730E/ TR840E/TR845E Adjusting method: 1) Select page: 0, address: 01, and set data: 01.

  • Page 118: Filter F0 Adjustment (Vc-195 Board)

    3. Filter f0 Adjustment (VC-195 board) 4. Y OUT Level Adjustment (VC-195 board) Minimize the chroma signal residual components during composite Set the Y signal output level. video signal input. Mode VTR stop Signal No signal Mode VTR stop Measurement Point Hi8 model : Signal No signal...

  • Page 119: C Out Level Adjustment (Vc-195 Board)

    5. C OUT Level Adjustment (VC-195 board) 6. RP Filter f0 Adjustment (VC-195 board) Set the chroma signal output level. Adjust the LPF of the playback RF amplifier. Mode VTR stop Mode VTR stop Signal No signal Signal No signal Pin 9 of CN910 (RF AGC OUT) Measurement Point Hi8 model :...

  • Page 120: Hi8 Rec Y Current Adjustment (Vc-195 Board) (Ccd-Tr840E/Tr845E)

    7. Hi8 REC Y Current Adjustment (VC-195 board) 10) Write the following data in page: F, address: 57 to 5A. (CCD-TR840E/TR845E) Address Data Adjust the Y FM signal recording current. Mode VTR recording (SP mode) Signal No signal Pin !º of CN910 (REC RF) Measurement Point Measuring Instrument Oscilloscope (20 MHz BW LIMIT: OFF)
  • Page 121 A = 185±5mV (PAL) press the PAUSE button of the adjusting remote commander. 12) Select page: F, address: 65, set the data noted down at step 4), Note 1: NTSC MODEL: CCD-TR311 press the PAUSE button of the adjusting remote commander. PAL MODEL:...
  • Page 122 9) Write the following data in page: F, address: 63 to 64. 9. Hi8 REC L Level Adjustment (VC-195 board) (CCD-TR840E/TR845E) Address Data Set the recording levels of the REC AFM signal and REC ATF signal. If the level is too low, the audio S/N will deteriorated, tracking will not be stable, or SP/LP will not be discriminated properly.

  • Page 123: Tr512E/Tr640E/Tr730E)

    3) of “Preparations only for the model without REC switch”. 3) Press the PAUSE button of the adjusting remote commander. Note 1: NTSC MODEL: CCD-TR311 4) Select page: D, address: 15, and set the data memorized at step PAL MODEL: CCD-TR311E/TR411E/TR412E/ 4) of “Preparations only for the model without REC switch”.

  • Page 124: Tr640E/Tr730E

    Center of the luminance line width A = 35.7±1.3mV (PAL) Standard8 model : A = 30.9±1.1mV (NTSC) A = 30.0±1.1mV (PAL) Note 1: PAL Hi8 model: CCD-TR840E/TR845E NTSC Standard8 model: CCD-TR311 1.35 µ sec PAL Standard8 model: CCD-TR311E/TR411E/ TR412E/TR511E/TR512E/ TR640E/TR730E Fig. 5-3-16. Connection: 1) Remove C085 (0.01µF, Pin !§...

  • Page 125: Stereo Audio System Adjustment (Ccd-Tr730E/Tr840E/Tr845E)

    3-5. STEREO AUDIO SYSTEM ADJUSTMENT [Connecting the measuring instruments for the audio] (CCD-TR730E/TR840E/TR845E) Connect the audio system measuring instruments in addition to the video system measuring instruments as shown in Fig. 5-3-17, and • Perform the adjustment using the color bar signal as a video perform adjustments at the power switch [VTR] or [PLAYER] signal input for VIDEO terminal.
  • Page 126 1. 1.5 MHz Deviation Adjustment (VC-195 board) Adjusting method : Sets the spectrum of the L-ch ((L+R)/2 signal) level modulated 1) Match the vertical ranges of CH1 and CH2 of the oscilloscope during recording. If deviated, the crosstalk signal of the audio signal to each other.
  • Page 127 Adjusting method : 2. 1.7 MHz Deviation Adjustment (VC-195 board) Sets the spectrum of the R-ch ((L-R)/2 signal) level modulated during 1) Match the vertical ranges of CH1 and CH2 of the oscilloscope to each other. recording. If deviated, the crosstalk signal of the audio signal will occur and the audio level will drop during both playback and 2) Set the oscilloscope to the ADD mode and CH2 to the normal recording.

  • Page 128: Bpf F0 Adjustment (Vc-195 Board)

    MONAURAL Sets the BPF passing frequency so that the AFM signal can separate from the playback RF signal properly. If deviated. the mono/stereo (CCD-TR311/TR311E/TR411E/TR412E/TR511E/ mode will be differentiated incorrectly, and noises and distortions TR512E/TR640E) will increase during high volume playback.

  • Page 129: Mhz Deviation Adjustment (Vc-195 Board)

    Adjustment Address IC202 Specified Value –7.5±0.5dBs Specified Value The distortion rate should be and minimum. Note 1: NTSC model: CCD-TR311 CN911 Adjusting method : PAL model: CCD-TR311E/TR411E/TR412E/TR511E/ 1) Select page: 0, address: 01, and set data: 01. TR512E/TR640E 2) Select page: F, address: 47, change the data and minimize the C085 distortion rate.

  • Page 130: Repair Parts List

    CCD-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ TR640E/TR730E/TR840E/TR845E SECTION 6 REPAIR PARTS LIST 6-1. EXPLODED VIEWS The components identified by mark ! or dotted line with mark NOTE: • Abbreviation ! are critical for safety. • Items marked “*” are not stocked since they are : East European Model Replace only with part number seldom required for routine service.

  • Page 131: Front Panel Block Assembly

    6-1-2. FRONT PANEL BLOCK ASSEMBLY not supplied not supplied not supplied not supplied MIC901 MIC902 CCD- TR730E/TR840E/ TR845E Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark X-3948-184-1 PANEL (870) ASSY, FRONT A-7073-504-A MA-311(7Z) BOARD, COMPLETE (TR412E) (TR840E:AEP,EE,NE,RU,UK/TR845E) X-3948-170-1 GRILLE (870) ASSY, MICROPHONE X-3948-187-1 PANEL (870) ASSY, FRONT (TR640E)

  • Page 132: Cabinet (R) Block Assembly

    6-1-3. CABINET (R) BLOCK ASSEMBLY not supplied not supplied LCD901 not supplied CCD-TR511E/TR512E/ TR640E/TR730E/ TR840E/TR845E supplied ND801 The components identified by CCD-TR840E/ mark ! or dotted line with mark TR845E ! are critical for safety. Replace only with part number not supplied specified.

  • Page 133: Evf Block Assembly (B/W Evf) (Except Ccd-Tr512E/Tr730E)

    6-1-4. EVF BLOCK ASSEMBLY (B/W EVF) (EXCEPT TR512E/TR730E) not supplied not supplied V901 The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified. Ref. No. Part No. Description Remark Ref.

  • Page 134: Evf Block Assembly (Color Evf) (Ccd-Tr512E/Tr730E)

    6-1-5. EVF BLOCK ASSEMBLY (COLOR EVF) (TR512E/TR730E) not supplied LCD902 not supplied ND5351 The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified. Ref. No. Part No. Description Remark Ref.

  • Page 135: Main Boards Block Assembly

    6-1-6. MAIN BOARDS BLOCK ASSEMBLY CCD-TR730E/ TR840E/TR845E EXCEPT CCD- TR311/TR311E/ TR411E/TR412E SE452 SE451 CCD-TR640E/TR730E/ TR840E/TR845E Be sure to read “Note on the CCD Imager replacement” on page 4–8 when changing the CCD imager. Ref. No. Part No. Description Remark Ref. No. Part No.

  • Page 136: Battery Panel And Lens Block Assembly

    6-1-7. BATTERY PANEL AND LENS BLOCK ASSEMBLY IC401 not supplied not supplied not supplied not supplied J901 Be sure to read “Note on the CCD Imager replacement” on page 4–8 when changing the CCD imager. Ref. No. Part No. Description Remark Ref.

  • Page 137: Zoom Lens Block Assembly

    6-1-8. ZOOM LENS BLOCK ASSEMBLY NIGHT SHOT Model Except CCD-TR311/TR311E/TR411E/TR412E M906 M905 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 8-848-722-01 DEVICE, LENS LSV-600A (SOC) 2-327-405-01 WASHER (EXCEPT TR311/TR311E/TR411E/TR412E) (EXCEPT TR311/TR311E/TR411E/TR412E) 8-848-724-01 DEVICE, LENS LSV-601A (SOC) 2-623-756-21 SCREW (B1.7X5), P...

  • Page 138: Cassette Compartment Assembly

    6-1-9. CASSETTE COMPARTMENT ASSEMBLY LS CHASSIS BLOCK SECTION (See page 6-10) MECHANISM CHASSIS BLOCK SECTION (See page 6-11) Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark A-7040-421-A DAMPER ASSY X-3945-399-1 GEAR ASSY, GOOSENECK 7-624-102-04 STOP RING 1.5, TYPE -E 3-947-503-01 SCREW (M1.4X2.5) X-3945-400-X CASSETTE COMPARTMENT ASSY 3-331-007-21 WASHER...

  • Page 139: Ls Chassis Assembly

    6-1-10. LS CHASSIS ASSEMBLY S002 S001 D001 FP-249 (not supplied) Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark A-7040-419-A BASE (S) BLOCK ASSY, GUIDE 3-965-563-01 GEAR, T SOFT A-7040-418-B BASE (T) BLOCK ASSY, GUIDE 3-965-559-01 STOPPER (T) 3-965-565-01 CLAW, T SOFT 3-965-557-01 STOPPER (T), GB X-3945-397-1 DECK ASSY, REEL, S...

  • Page 140: Mechanism Chassis Assembly

    6-1-11. MECHANISM CHASSIS ASSEMBLY M901 M903 M902 S901 not supplied not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark X-3947-343-1 GROUND (IM) ASSY, SHAFT 3-965-535-01 SPRING (LIMITTER ARM S), COIL 3-965-550-02 SCREW (M1.7X1.6) 3-965-542-01 SHIELD, MOTOR 1-657-785-11 FP-248 FLEXIBLE BOARD 3-965-539-01 GEAR (A) 3-965-545-01 SPACER, CAPSTAN...

  • Page 141: Electrical Parts List

    CF-49 CD-181 6-2. ELECTRICAL PARTS LIST Note: • Due to standardization, replacements in the parts list • SEMICONDUCTORS The components identified by In each case, u: µ , for example: may be different from the parts specified in the mark ! or dotted line with mark uA...: µ...
  • Page 142 CF-49 DD-105 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R016 1-216-822-11 METAL CHIP 1.2K 1/16W A-7073-448-A DD-105(H) BOARD, COMPLETE R019 1-216-823-11 METAL CHIP 1.5K 1/16W ************************* R020 1-216-823-11 METAL CHIP 1.5K 1/16W (TR840E/TR845E) R022 1-216-823-11 METAL CHIP 1.5K 1/16W R023...
  • Page 143 DD-105 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C860 1-107-826-11 CERAMIC CHIP 0.1uF L814 1-414-396-21 INDUCTOR 4.7uH C861 1-162-970-11 CERAMIC CHIP 0.01uF (TR512E/TR730E) L815 1-414-396-21 INDUCTOR 4.7uH C864 1-113-985-11 TANTAL. CHIP 10uF L816 1-414-396-21 INDUCTOR 4.7uH (TR512E/TR730E) C867 1-164-346-11 CERAMIC CHIP L817...
  • Page 144 DD-105 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark Q932 8-729-037-74 TRANSISTOR UN9213J-(K8).SO R877 1-216-864-11 METAL CHIP 1/16W Q933 8-729-037-74 TRANSISTOR UN9213J-(K8).SO (EXCEPT TR512E/TR730E) R879 1-216-837-11 METAL CHIP 1/16W Q934 8-729-037-53 TRANSISTOR 2SB1462J-QR(K8).SO R880 1-218-895-11 RES,CHIP 100K 0.50% 1/16W <...
  • Page 145 FP-355 MA-311 FP-249 (FP-356) LB-54 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark FP-249 FLEXIBLE BOARD < TRANSFORMER > ********************* (Ref. No. 8,000 Series) ! T5351 1-426-848-51 TRANSFORMER, INVERTER 1-658-214-11 FP-356 FLEXIBLE BOARD 3-965-551-01 HOLDER (S), SENSOR 3-965-552-01 HOLDER (T), SENSOR A-7073-449-A MA-311(H0) BOARD, COMPLETE **************************...
  • Page 146 1-135-259-11 TANTAL. CHIP 10uF 6.3V (TR730E/TR840E/TR845E) D302 8-749-060-65 DIODE DCC3810 C351 1-164-227-11 CERAMIC CHIP 0.022uF (EXCEPT TR311/TR311E/TR411E/TR412E) (TR730E/TR840E/TR845E) D303 8-719-061-82 DIODE TLSU1002(TPX1,SONY) C352 1-162-964-11 CERAMIC CHIP 0.001uF D305 8-719-404-49 DIODE MA111-TX (TR730E/TR840E/TR845E) (EXCEPT TR311/TR311E/TR411E) C353 1-162-927-11 CERAMIC CHIP 100PF D309...
  • Page 147 MA-311 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark Q305 8-729-402-42 TRANSISTOR UN5213-TX R342 1-216-831-11 METAL CHIP 6.8K 1/16W (EXCEPT TR311/TR311E/TR411E/TR412E) (TR730E/TR840E/TR845E) Q321 8-729-230-63 TRANSISTOR 2SD1819A-QRS-TX (EXCEPT TR730E/TR840E/TR845E) R343 1-216-829-11 METAL CHIP 4.7K 1/16W (TR730E/TR840E/TR845E) Q322 8-729-420-24 TRANSISTOR 2SB1218A-QRS-TX R344 1-216-833-11 METAL CHIP...
  • Page 148 PJ-81 SE-65 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark A-7073-422-A PJ-81(M) BOARD, COMPLETE A-7073-423-A SE-65(MM) BOARD, COMPLETE (TR640E) ************************ ************************* (EXCEPT TR730E/TR840E/TR845E) A-7073-427-A SE-65(H) BOARD, COMPLETE A-7073-426-A PJ-81(H) BOARD, COMPLETE (TR840E/TR845E) ************************ (TR730E/TR840E/TR845E) ************************ A-7073-543-A PJ-81(S) BOARD, COMPLETE (TR730E) <...
  • Page 149 VC-195 SE-65 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark SE452 1-803-041-21 SENSOR, ANGULAR VELOCITY (PITCH) C041 1-107-826-11 CERAMIC CHIP 0.1uF C042 1-162-970-11 CERAMIC CHIP 0.01uF C043 1-162-970-11 CERAMIC CHIP 0.01uF A-7093-440-A VC-195(7ZCBU) BOARD, COMPLETE (TR311) C047 1-162-970-11 CERAMIC CHIP 0.01uF...
  • Page 150 VC-195 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C157 1-162-964-11 CERAMIC CHIP 0.001uF C209 1-162-921-11 CERAMIC CHIP 33PF (TR840E:AUS) (EXCEPT TR840E/TR845E) C158 1-162-970-11 CERAMIC CHIP 0.01uF C210 1-162-922-11 CERAMIC CHIP 39PF (TR840E/TR845E) C159 1-164-346-11 CERAMIC CHIP C160 1-162-970-11 CERAMIC CHIP 0.01uF...
  • Page 151 VC-195 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C327 1-162-970-11 CERAMIC CHIP 0.01uF C465 1-109-982-11 CERAMIC CHIP (TR730E/TR840E/TR845E) C467 1-162-968-11 CERAMIC CHIP 0.0047uF 10% C328 1-164-232-11 CERAMIC CHIP 0.01uF C468 1-165-176-11 CERAMIC CHIP 0.047uF C330 1-109-982-11 CERAMIC CHIP C469 1-107-826-11 CERAMIC CHIP...
  • Page 152 VC-195 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C555 1-107-826-11 CERAMIC CHIP 0.1uF C710 1-135-201-11 TANTALUM CHIP 10uF C556 1-162-970-11 CERAMIC CHIP 0.01uF (TR845E) C711 1-162-970-11 CERAMIC CHIP 0.01uF C557 1-162-962-11 CERAMIC CHIP 470PF (TR845E) C558 1-115-467-11 CERAMIC CHIP 0.22uF...
  • Page 153 VC-195 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark FB202 1-414-228-11 INDUCTOR CHIP 0UH L016 1-412-946-11 INDUCTOR 3.9uH FB203 1-414-228-11 INDUCTOR CHIP 0UH L017 1-414-754-11 INDUCTOR 10uH FB204 1-414-228-11 INDUCTOR CHIP 0UH (TR730E/TR840E/TR845E) L018 1-410-656-11 INDUCTOR CHIP 150uH FB205 1-414-228-11 INDUCTOR CHIP 0UH (TR730E/TR840E/TR845E) L019...
  • Page 154 VC-195 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark Q039 8-729-037-52 TRANSISTOR 2SD2216J-QR(K8).SO < RESISTOR > Q040 8-729-037-74 TRANSISTOR UN9213J-(K8).SO Q041 8-729-230-72 TRANSISTOR 2SA1362-(YG)-EL R001 1-216-864-11 METAL CHIP 1/16W R002 1-216-864-11 METAL CHIP 1/16W Q042 8-729-037-74 TRANSISTOR UN9213J-(K8).SO R003 1-216-806-11 RES,CHIP 1/16W...
  • Page 155 VC-195 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R064 1-216-828-11 METAL CHIP 3.9K 1/16W R112 1-216-833-11 METAL CHIP 1/16W (TR840E/TR845E) R113 1-216-825-11 METAL CHIP 2.2K 1/16W R152 1-216-822-11 METAL CHIP 1.2K 1/16W R064 1-216-864-11 METAL CHIP 1/16W R154 1-216-822-11 METAL CHIP...
  • Page 156 VC-195 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R231 1-216-812-11 METAL CHIP 1/16W R328 1-162-925-11 CERAMIC CHIP 68PF R331 1-216-820-11 METAL CHIP 1/16W R232 1-216-815-11 METAL CHIP 1/16W R343 1-216-864-11 METAL CHIP 1/16W (TR311/TR512E/TR730E) (TR730E/TR840E/TR845E) R233 1-216-824-11 METAL CHIP 1.8K...
  • Page 157 VC-195 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R469 1-216-841-11 METAL CHIP 1/16W R566 1-216-835-11 METAL CHIP 1/16W R470 1-216-829-11 METAL CHIP 4.7K 1/16W R567 1-216-825-11 METAL CHIP 2.2K 1/16W R471 1-216-833-11 METAL CHIP 1/16W R569 1-216-825-11 METAL CHIP 2.2K...
  • Page 158 VC-195 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R665 1-216-853-11 METAL CHIP 470K 1/16W R715 1-216-829-11 METAL CHIP 4.7K 1/16W (TR730E/TR840E/TR845E) (TR845E) R666 1-216-821-11 METAL CHIP 1/16W R716 1-216-819-11 METAL CHIP 1/16W R667 1-216-821-11 METAL CHIP 1/16W (TR845E) R717...
  • Page 159 VC-195 VF-99 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R924 1-216-821-11 METAL CHIP 1/16W < DIODE > R925 1-216-821-11 METAL CHIP 1/16W D901 8-719-951-21 DIODE PR1102W-TR R926 1-216-864-11 METAL CHIP 1/16W D903 8-719-404-49 DIODE MA111-TX (TR730E/TR840E/TR845E) R927 1-216-864-11 METAL CHIP...
  • Page 160 VF-119 VF-99 VF-120 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < VARIABLE RESISTOR > < COIL > RV903 1-238-852-11 RES, ADJ, CERMET 470 L5401 1-412-951-11 INDUCTOR 10uH RV904 1-223-566-11 RES, ADJ, METAL GLAZE 1M L5402 1-412-951-11 INDUCTOR 10uH L5403 1-412-959-11 INDUCTOR 47uH...
  • Page 161 VF-120 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C5307 1-135-181-21 TANTALUM CHIP 4.7uF 6.3V MISCELLANEOUS C5308 1-164-227-11 CERAMIC CHIP 0.022uF ************** C5309 1-162-970-11 CERAMIC CHIP 0.01uF C5310 1-164-217-11 CERAMIC CHIP 150PF 1-475-619-11 SWITCH BLOCK, CONTROL (SS-8500) C5311 1-107-826-11 CERAMIC CHIP 0.1uF...
  • Page 162 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark M901 A-7048-870-A DRUM ASSY (DGH-0E3A-R) (NTSC) 3-861-899-11 MANUAL, INSTRUCTION (ENGLISH, RUSSIAN) M902 8-835-531-32 CAPSTAN ASSY (TR411E:EE,UK/TR412E:EE,NE,RU/TR511E:EE,NE,RU,UK/ M903 X-3945-401-1 MOTOR ASSY, DC (LOADING) TR640E:EE,NE,RU,UK/TR840E:EE,NE,RU,UK/TR845E) M905 1-763-047-11 MOTOR, FOCUS STEPPING 3-861-899-21 MANUAL, INSTRUCTION M906 1-763-046-11 MOTOR, ZOOM STEPPING...
  • Page 163 S I D E B CN909 CN551 I C 2 0 4 C N 9 0 7 C N 9 1 0 VC-195 BOARD CN914 IC402 C N 9 0 4 I C 4 5 1 IC301 SIDE A CCD-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/TR640E/TR730E/TR840E/TR845E...
  • Page 164 FOR CAMERA COLOR REPRODUCTION ADJUSTMENT Take a copy CAMERA COLOR REPRODUCTION FRAME and Parts reference sheets with a clear sheet for use. For NTSC model CCD-TR311 For PAL model CCD-TR311E/TR411E/TR412E/TR511E/TR512E/ TR640E/TR730E/TR840E/TR845E...
  • Page 165 CCD-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ TR640E/TR730E/TR840E/TR845E Sony Corporation 98B0977-1 Printed in Japan © 1998. 2 9-974-039-11 Personal A&V Products Company Published by Quality Engineering Dept. – 266 – (Osaki East)

This manual is also suitable for:

Handycam ccd-tr311eHandycam ccd-tr512eHandycam ccd-tr640eHandycam ccd-tr730eHandycam ccd-tr840eHandycam ccd-tr411e ... Show all

Table of Contents