Sony CCD-TRV118 Service Manual page 332

Changing the menu settings
Icon/item Mode
OTHERS
VIDEO EDIT * 4) z RETURN
* 5)
Note * 4)
If you press DISPLAY with DISPLAY set to V-OUT/LCD in the menu settings, the
picture from a TV or VCR will not appear on the screen even when your camcorder is
connected to outputs on the TV or VCR. (Except when your camcorder is connected
with the i.LINK cable)
After five minutes of removing the power source *
The COMMANDER item returns to their default settings.
When recording a close subject
When REC LAMP is set to ON, the red camera recording lamp on the front of the
camcorder may reflect on the subject if it is close. In this case, we recommend that you
set REC LAMP to OFF.
1)
* Modes on the POWER switch vary depending on models (p. 16).
2)
*
* 3)
4)
*
* 5)
Meaning
To cancel video editing.
TAPE To make a program and perform video editing
(p. 106).
MEMORY To make a program and perform MPEG editing
(p. 156).
— To make a program and perform video editing
(p. 106).
3)
POWER
switch * 1)
VCR
VCR
223