Using Landscape Or Portrait View - Getac V200 User Manual

The active digitizer feature cannot be used in the BIOS Setup program

or when using the full screen in DOS mode.
NOTE:
You can move the cursor by bringing the digitizer pen close to the

screen, without actually touching the screen's surface.
Do not move the digitizer pen too quickly. If the pen moves too quickly,

the cursor may be unable to follow its movement.
If you cannot click on the edge of the screen, hold the digitizer pen

perpendicular to the display and try clicking again.

Using Landscape or Portrait View

To rotate the display, press the button
computer to open the OSD Control Panel and click
this Rotate button is clicked, the screen display rotates counter-clockwise by
O
90 .
For a Model without WWAN Module
Primary
Landscape
Display
Primary Secondary
Portrait Landscape
Display
Display
located on the front of your
Secondary
Portrait
Display
Operating Your Computer
. Each time
Primary
Landscape
Display
2-15