Battery Pack; Charging The Battery Pack - Getac V200 User Manual

Battery Pack

The battery pack is the internal power source for the computer. It is
rechargeable using the AC adapter.
The operating time of a fully charged battery pack depends on how you are
using the computer. When your applications often access peripherals, you
will experience a shorter operating time.
NOTE: Care and maintenance information for the battery is provided in the
"Battery Pack" section in Chapter 7.

Charging the Battery Pack

NOTE:
Charging will not start if the battery's temperature is below 0 °C (32 °F)

or above 40 °C (104 °F); the charging process will stop if the battery's
temperature gets above 60 °C (140 °F). To avoid damaging the battery
under this situation, disconnect the AC adapter and wait for the battery
to return to room temperature before charging again.
During charging, do not disconnect the AC adapter before the battery

has been fully charged; otherwise you will get a prematurely charged
battery.
To charge the battery pack, connect the AC adapter to the computer and an
electrical outlet. The Battery Charge Indicator (
yellow to indicate that charging is in progress. You are advised to keep the
computer power off while the battery is being charged. When the battery is
fully charged, the Battery Charge Indicator lights green.
It takes approximately 3 hours to fully charge the Li-Ion battery pack when
the computer is off, and approximately 6 hours to fully charge the Li-Ion
battery pack when the computer is on.
) on the computer glows
Managing Power
3-3