About The Modem - Getac V200 User Manual

paper or other objects that will reduce cooling. Do not use the AC
adapter while it is inside a carrying case.
Connect the adapter to a proper power source. The voltage

requirements are found on the product case and/or packaging.
Do not use the adapter if the cord becomes damaged.

Do not attempt to service the unit. There are no serviceable parts inside.

Replace the unit if it is damaged or exposed to excess moisture.
Option ANSI/ISA 12.12.01 & CSA C22.2 No. 213
Instruction
INSTALLATION INSTURCTIONS:
Installation instructions are provided with each device and shall include the
following or equivalent wording:
This equipment is suitable for use in Class I, Division 2, Groups A, B, C and

D OR non-hazardous locations only.
WARNING – EXPLOSION HAZARD – Do not disconnect equipment unless

power has been removed or the area is known to be non-hazardous.
WARNING – EXPLOSION HAZARD - Substitution of components may

impair suitability for Class I, Division 2.
WARNING - EXPLOSION HAZARD - External Connections/Hubs are not to

be used in a Hazardous Location.
WARNING - EXPLOSION HAZARD - Notebook is to be only powered from

the battery pack while in Hazardous Locations.

About the Modem

Caution
Never install telephone wiring during a lightning storm.

Never install telephone jacks in wet locations unless the jack is

specifically designed for wet locations.
Regulatory Information
B-5