Using Pc Cards - Getac V200 User Manual

Using PC Cards

NOTE:
Some PC cards require additional system resources. Before using such PC

card, you may have to free other system resources for the PC card.
Although some PC cards can be inserted and removed without turning

off the computer, you cannot remove or install PC cards during Sleep
mode.
Your computer (standard configuration) has one PC card slot that support
CardBus specifications. The slots can accommodate a type II card. Typical
type II cards are flash memory, SRAM, modem, LAN, and SCSI cards.
To insert a PC card:
1. Locate the PC card slot (the lower slot) on the left side of the computer.
2. Slide the PC card, with its label facing up, into the slot until the eject
button pops out.
3. When a new card is seated, the computer will detect it and try to install
the appropriate driver. Follow the on-screen instructions to complete the
process.
To remove a PC card:
1. Double-click the Safely Remove Hardware
Windows taskbar and the Safely Remove Hardware window appears on
screen.
2. Select (highlight) the PC card from the list to disable the card.
Eject button
icon found on the
Expanding Your Computer
4-9