Using The Accessories; Using The Tether - Getac V200 User Manual

Using the Accessories

Using the Tether

A tether is provided for attaching the stylus to your computer.
1. Insert one of the tether's loop ends through the hole of the stylus (as
indicated by
(as indicated by
2. Insert the other loop end to the tether hole on the computer (as
indicated by
indicated by
1-16
Getting Started

below). Then, insert the other end through the first loop

below) and pull it tight.

below). Then, insert the stylus end through the loop (as

below) and pull it tight.