Using Landscape Or Portrait View - Getac V200 User Manual

Using Landscape or Portrait View

After Windows is started up, you can rotate the display and perform the
touchscreen and active digitizer operations in the rotated mode.
To rotate the display, press the button
computer to open the OSD control panel and click
this Rotate button is clicked, the screen display rotates counter-clockwise by
O
90 .
NOTE:
If the screen display resolution has been set to 800×600 pixels, you can
rotate the display to Primary Landscape and Secondary Landscape only.
While the display is rotated:
– Do not set the display resolution larger than the resolution of the LCD
display.
– If you exit Windows, the next time Windows is started up, the operation
of the touchpad will not match the display angle for a few seconds.
– The computer's performance will decrease slightly.
– If a video is played, the picture may not be displayed properly or the
sound may be broken up. This problem can be corrected by rotating
the display to Primary Landscape.
– The touchpad's scroll function does not work.
The display cannot be rotated when DOS mode is set to "Full Screen."
For a Model without 3G Module
Primary
Landscape
Display
Primary Secondary
Portrait Landscape
Display
Display
located on the front of your
Secondary
Portrait
Display
Operating Your Computer
. Each time
Primary
Landscape
Display
2-23