Getac V200 User Manual page 22

Ref Component

Light Sensor

Fingerprint
Scanner
(optional)

Keyboard

Indicators
Power
Battery
Charge
Hard Disk
Drive In-Use
RF
Num Lock
1-14
Getting Started
Description
Detects the surrounding lighting condition
for automatic adjustment of the LCD
brightness and optional keyboard
backlight.
Uses fingerprint verification to protect your
computer against unauthorized access.
Serves as the data input device.
Show the current status of the computer's
devices.
Lights green when the computer is turned
on.
Lights yellow when the computer is in Sleep
mode.
Lights green when the battery is fully
charged.
Lights yellow when the battery is being
charged.
Blinks yellow when the battery's capacity is
below 10%.
Blinks green and yellow by turns to indicate
charging is suspended because the battery's
temperature is either too high or too low.
Lights green when the computer is
accessing the hard disk drive.
Blinks red when the optional hard disk drive
heater is on for low temperature operation.
Lights when the radio frequency is on.
Lights when Num Lock is on.
See Also
P. 2-26
P. 2-2
P. 1-7
P. 3-3
P. 3-6
P. 8-9
P. 2-3