Modem Problems; Power Management Problems - Getac V200 User Manual

Modem Problems

The modem does not work.
Make sure that the modem driver is correctly installed.

Make sure that the telephone line is properly connected.

Make sure that the COM port in the communication software is correctly

set.
Turn off power management.


Power Management Problems

The computer does not enter Sleep or Hibernation mode
automatically.
If you have a connection to another computer, the computer does not

enter Sleep or Hibernation mode if the connection is actively in use.
Make sure that the Sleep or Hibernation time-out is enabled.

The computer does not enter Sleep or Hibernation mode
immediately.
If the computer is performing an operation, it normally waits for the

operation to finish.
The computer does not resume from Sleep or Hibernation mode.
The computer automatically enters Sleep or Hibernation mode when the

battery pack is empty. Do any one of the following:
− Connect the AC adapter to the computer.
− Replace the empty battery pack with a fully charged one.
The computer does not enter Hibernation mode with the Fn+F12 hot
keys.
Make sure that the Hibernation function is specified for the sleep

button.
8-7
Troubleshooting