System Recovery - Getac V200 User Manual

System Recovery

Use System Recovery when:
Your Windows operating system does not start at all.

You want to restore the system to the factory state.

WARNING:
Using this feature will reinstall Windows to your system and configure it

to the system's factory default settings. All data on the hard disk drive
will be lost.
Make sure that power is not interrupted during the recovery process. An

unsuccessful recovery may result in Windows startup problems.
To run System Recovery:
1. Connect the AC adapter.
2. During system startup when the following screen appears, press Ctrl +
Alt + F2 keys for four seconds.
3. In the screen that appears, select Recovery to start the recovery process.
Using BIOS Setup and System Recovery
5-15