Startup Problems; Wlan Problems - Getac V200 User Manual

Click the speaker symbol on the taskbar and check the Windows volume

control.
Check the volume control of your computer.


Startup Problems

When you turn on the computer, it does not seem to respond.
Make sure that either the AC adapter is connected or the battery has

power.
For models with the HDD heater option: When turning on the computer

in an extremely low temperature environment, the computer will heat
up the hard disk before starting up. The hard disk drive in-use indicator
blinks red to indicate the heater is on. (In conditions where the AC
adapter is connected and the temperature is above an acceptable range,
the computer will display messages on the screen informing you of the
heating process; in other conditions, the screen is simply blank.) Wait till
the heating is finished. However, if external AC power is not available
and the remaining battery power is too low for the heating to complete,
the computer may not start up. In case the computer fails to start up,
turn off the computer and leave it in room temperature for about an
hour before trying to turn it on again.
When you turn on the computer, it stops after POST.
Restart your computer.


WLAN Problems

I cannot use the WLAN feature.
Make sure that the mini PCI-E WLAN card is correctly installed.

Make sure that the necessary driver(s) is correctly installed.

Make sure that the WLAN feature is turned on.

8-9
Troubleshooting